Allicdata Part #: | 70098-1770-ND |
Manufacturer Part#: |
SCS-2525-4-1980 00200M |
Price: | $ 190.86 |
Product Category: | Industrial Controls |
Manufacturer: | Omron Automation and Safety |
Short Description: | EDGE SENSOR |
More Detail: | N/A |
DataSheet: | SCS-2525-4-1980 00200M Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 173.50200 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
SCS-2525-4-1980 00200M Application Field and Working Principle
The SCS-2525-4-1980 00200M, also referred to as the 200M, is a commonly used industrial equipment designed for maintenance, repair, and installation applications. It is a heavy-duty hydraulic press that can apply force up to 200 kilonewtons (200kN).
Given its robust construction and ability to deliver large amounts of force along a single axis, the 200M can be used to perform many tasks in a range of industrial environments. This includes fabricating and testing components; stamping, forming, and pressing materials; fastening products; and cutting, forming, and crimping wires. Additionally, it can be used to perform tests on material properties, such as tension, shear strength, and fatigue tests, using suitable fixtures.
The 200M consists of four main components: a frame, a hydraulic system, a control panel, and a workhead. The frame is constructed from steel and provides the structural support for all other components. The hydraulic system contains a serially-mounted hydraulic pump, a hydraulic motor, and a series of valves. This system provides the 200N of force required to operate the machine.
The control panel, located on the side of the machine, consists of a series of switches, buttons, and gauges that allow the operator to adjust or turn on/off various functions of the 200M. The workhead is located at the end of the frame and is comprised of a cylindrical plunger, which is controlled by the operator, and a platen, which rests on the plunger. When pressure is applied to the plunger, the platen presses down on the material being worked on.
The 200M\'s working principle is simple. With the pump and motor running, the hydraulic system converts the engine\'s energy into hydraulic pressure, which is used to press the plunger down on the material being worked on. The pressure applied to the material is equal to the amount of hydraulic pressure being generated. The operator can adjust the amount of pressure being applied by turning the pressure adjuster switch on the control panel.
With its wide range of uses, the SCS-2525-4-1980 00200M is an indispensable tool for many industries. From manufacturing and repairs to tests and inspections, this versatile machine has been used to carry out a variety of tasks safely and efficiently.
The specific data is subject to PDF, and the above content is for reference
KEX12(V)W W W
TRIM KIT 5 - 4836 AND 1 - 3654
UM10-4272 SAFETY MAT 10M CABLE
UM4866 UNIVERSAL CHRYS SPEC
SAFETY MAT 1200X1500MM
SAFETY MAT 1100X1000MM