SD02D2415A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices used to convert Direct Current power from one voltage level to another, usually with very high efficiency. The SD02D2415A is a miniature, low-power synchronous buck converter with a wide input voltage range from 4.5V to 24V. It is equipped with adjustable output voltage up to 22V, with output current capability of up to 0.5A. The SD02D2415A offers a standby current of only 7uA and features under-voltage lockouts, over current protection, and over temperature protection.

The SD02D2415A is ideal for applications such as battery-powered systems with multiple power rails, where low power is required. It is also useful in applications such as smart home automation, consumer electronics devices, microprocessors, sensors, and cameras. It can also be used in automotive applications for powering safety systems, fuel injection, and braking systems.

The working principle of the SD02D2415A is based on the switch mode power conversion technology. By periodically switching the power supply from its input voltage to a regulated output voltage, it efficiently converts the DC input voltage to a higher or lower DC output voltage. This switching mechanism is based on the use of two transistors, an inductor, and either a diode or a synchronous rectifier circuit.

When the input power is applied, the input current passes through the transistor called the upper switch. Once the upper transistor is turned on, the inductor begins to build up magnetic energy. The magnetic energy stored in the inductor is converted into electrical energy when the upper switch is turned off. This electrical energy flows through either a diode or a synchronous rectifier, determined by the desired output voltage.

When the output voltage is regulated, the current flowing through the lower switch is stopped at the same time as the upper switch. This is done by setting the duty cycle of the signal applied to the lower switch at the same time as the switching off of the upper switch. With this regulation, the output voltage can be changed, allowing the SD02D2415A to convert the input voltage into any voltage level within its range.

Finally, a constant output voltage is maintained by an internal feedback control circuit. This circuit is designed to compare the voltage at the converter’s output with the reference voltage. If the output voltage is higher than the reference voltage, the duty cycle of the control signal is decreased, which reduces the output voltage. Conversely, if the output voltage is lower than the reference voltage, the duty cycle of the control signal is increased, which increases the output voltage.

In conclusion, the SD02D2415A is a miniature, low-power synchronous buck converter, widely used for powering various consumer and automotive applications. Its working principle is based on the switch mode power conversion technology, which is used to efficiently convert the DC input voltage to any regulated voltage. With its adjustable output voltage, over-current protection, and under-voltage lockout feature, the SD02D2415A is an ideal choice for powering multiple devices in your designs.

The specific data is subject to PDF, and the above content is for reference