SDE1006A-561K Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as SDE1006A-561K, are electronic components used to store energy in the form of electricity for various circuit applications. They have a stable and predictable inductance, which is measured in units of Henrys (uH). A fixed inductor is typically composed of an inductor core made of soft iron or ferrite, electrical windings, and a substrate material such as PCB (Printed Circuit Board). Fixed inductors are commonly used in power supply circuits, signal filtering, and oscillators.

The SDE1006A-561K is a surface mount, power inductor with an inductance of 560 uH. It features an operating temperature range of -40°C to 85°C and a rated current of 5.5A. The SDE1006A-561K also has a tolerance of ±20% and a high frequency saturation inductance of 1.45mH. Its construction consists of an iron powder core material encapsulated in resin with a magnetic shield for added assurance.

In terms of applications, the SDE1006A-561K is primarily used to filter high frequency or post-amplification signals. The inductor delivers a current drawn through the inductor core which is then magnetically coupled to the flux surrounding the inductor, thus creating an inductive effect. This inductive effect creates a low-pass filter which filters out high frequency signals and allow only the lower frequency signals to pass through.

In addition to being used for signal filtering, the SDE1006A-561K can also be used in power supply designs to maintain a constant output voltage when the current changes. The inductor acts as an impedance device that filters out high frequencies. This allows the steady operating voltage to remain constant even as the input current changes.

The SDE1006A-561K is also used in oscillators. An oscillator is a device that generates repetitive oscillations, usually in the form of periodic electrical signals. The SDE1006A-561K works in an oscillator by creating a feedback loop between the inductor and the power supply, creating a resonant frequency. This frequency is determined by the inductive reactance and capacitive properties of the inductor.

Overall, the SDE1006A-561K is used to filter higher frequency signals, maintain a steady output voltage, and generate a resonant frequency. It is an excellent choice for electronics designs as it offers high performance and reliability in a small package. With its high frequency saturation inductance of 1.45mH, the SDE1006A-561K is a great option for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference