Allicdata Part #: | SDQ25-821-R-ND |
Manufacturer Part#: |
SDQ25-821-R |
Price: | $ 1.12 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Eaton |
Short Description: | INDUCT ARRAY 2 COIL 824.3UH SMD |
More Detail: | Shielded 2 Coil Inductor Array 3.3mH Inductance - ... |
DataSheet: | SDQ25-821-R Datasheet/PDF |
Quantity: | 1000 |
2900 +: | $ 1.02129 |
Current Saturation - Series: | 70mA |
Height: | 0.098" (2.50mm) |
Size / Dimension: | 0.205" L x 0.205" W (5.20mm x 5.20mm) |
Package / Case: | Nonstandard |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | -- |
Shielding: | Shielded |
DC Resistance (DCR) - Series: | 28.99 Ohm |
DC Resistance (DCR) - Parallel: | 7.25 Ohm |
Series: | SDQ |
Current Saturation - Parallel: | 140mA |
Current Rating - Series: | 93mA |
Current Rating - Parallel: | 186mA |
Tolerance: | ±20% |
Inductance - Connected In Series: | 3.3mH |
Inductance - Connected In Parallel: | 824.3µH |
Number of Coils: | 2 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Arrays and signal transformers are widely used in a variety of applications. One of the most commonly used devices is the SDQ25-821-R, which is a two-way digital signal processor. The device consists of two sub-units: an array of converters and an amplifier. The first sub-unit is responsible for converting electrical signals from a given input source into digital equivalent at 0V and 1V. This process is referred to as Analog-to-Digital (A/D) conversion. The amplifier then boosts the digital signal to a usable level, allowing for the output of the device.
The SDQ25-821-R is designed to operate in several applications, including low frequency digital signal processing, radio frequency communications, and audio/video circuitry. It is designed to operate in harsh environments, including temperatures ranging from -20°C to +85°C and humidity level up to 95%. The device is also designed to survive short term high voltage transients and surges, making it suitable for outdoor applications.
The working principle of the SDQ25-821-R is quite simple. The array of converters present in the device first converts the incoming electrical signal into digital form. The digital form signal is then amplified to the usable level. This amplification process is referred to as digital-to-analog (D/A) conversion. The amplified signal, which is in analog form, is then sent to its destination, either to be used directly or converted back into digital form for further processing.
The main advantage of the SDQ25-821-R is its ability to provide a reliable and consistent output with minimal distortion. This makes the device suitable for applications that require a steady output that cannot be disturbed or corrupted. It is also designed to provide accurate conversion of signal levels and levels of dynamic range, as well as the ability to handle high frequencies without damaging the signal. In addition, its signal to noise ratio is extremely good, making it suitable for use in a wide variety of applications.
In summary, the SDQ25-821-R is a useful device for a variety of applications, due to its ability to provide reliable and consistent output with minimal distortion. Its Digital-to-Analog conversion technology allows for accurate signal conversion, and its ability to handle high frequencies without damaging the signal make it suitable for a range of applications. Additionally, its signal-to-noise ratio is impressive, making it a viable choice for applications with demanding requirements.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SDQ25-100-R | Eaton | 1.11 $ | 2900 | INDUCT ARRAY 2 COIL 9.8UH... |
SDQ25-101-R | Eaton | 1.16 $ | 11600 | INDUCT ARRAY 2 COIL 98.57... |
SDQ25-150-R | Eaton | 1.06 $ | 2900 | INDUCT ARRAY 2 COIL 14.79... |
SDQ25-4R7-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 5UH S... |
SDQ25-R47-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 392NH... |
SDQ25-R82-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 648NH... |
SDQ25-1R5-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 1.35U... |
SDQ25-2R2-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 2.31U... |
SDQ25-3R3-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 2.89U... |
SDQ25-1R0-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 970NH... |
SDQ25-820-R | Eaton | 1.03 $ | 1000 | INDUCT ARRAY 2 COIL 81.61... |
SDQ25-102-R | Eaton | 1.06 $ | 1000 | INDUCT ARRAY 2 COIL 1MH S... |
SDQ25-151-R | Eaton | -- | 1000 | INDUCT ARRAY 2 COIL 150.2... |
SDQ25-221-R | Eaton | 1.09 $ | 1000 | INDUCT ARRAY 2 COIL 223.1... |
SDQ25-6R8-R | Eaton | 1.1 $ | 1000 | INDUCT ARRAY 2 COIL 6.73U... |
SDQ25-331-R | Eaton | 1.11 $ | 1000 | INDUCT ARRAY 2 COIL 329.7... |
SDQ25-471-R | Eaton | 1.11 $ | 1000 | INDUCT ARRAY 2 COIL 472.4... |
SDQ25-821-R | Eaton | 1.12 $ | 1000 | INDUCT ARRAY 2 COIL 824.3... |
SDQ25-330-R | Eaton | 1.13 $ | 1000 | INDUCT ARRAY 2 COIL 33.8U... |
SDQ25-220-R | Eaton | 1.15 $ | 1000 | INDUCT ARRAY 2 COIL 22.47... |
SDQ25-8R2-R | Eaton | 1.16 $ | 1000 | INDUCT ARRAY 2 COIL 8.71U... |
SDQ25-680-R | Eaton | 1.16 $ | 1000 | INDUCT ARRAY 2 COIL 69.19... |
SDQ25-470-R | Eaton | 1.16 $ | 1000 | INDUCT ARRAY 2 COIL 47.43... |
SDQ25-681-R | Eaton | 1.11 $ | 1000 | INDUCT ARRAY 2 COIL 677.4... |
INDUCT ARRAY 2 COIL 170NH SMDUnshielded ...
INDUCT ARRAY 2 COIL 677.4UH SMDShielded ...
INDUCT ARRAY 2 COIL 5.7UH SMDUnshielded ...
INDUCT ARRAY 2 COIL 820UH SMDShielded 2 ...
INDUCT ARRAY 2 COIL 470UH SMDShielded 2 ...
INDUCT ARRAY 2 COIL 220UH SMDShielded 2 ...