SEC1210T/PV-UR2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SEC1210T/PV-UR2 is an SSR (Solid State Relay) interface module. It is designed to provide the user with the flexibility and functionality needed for a variety of applications. This article will discuss the application field and working principle of the SEC1210T/PV-UR2.

Application Field

The SEC1210T/PV-UR2 is commonly used in control systems, HVAC (Heating, Ventilation, and Air Conditioning) systems, and load testing applications. It is also used to drive up to two outputs, such as motors, electric heaters,etc. It can also be used to switch low level signals such as analog signals and TTL signals more precisely.

Working Principle

The SEC1210T/PV-UR2 works by using a MOSFET (Metal Oxide Semiconductor Field Effect Transistor) to turn on and off an AC load. The MOSFET is a type of transistor that can switch large currents with low voltage. When a positive electrical signal is applied to the module’s control terminal, the MOSFET turns on, allowing current to flow through the load and activate the device. When the signal is removed, the MOSFET turns off and current ceases to flow.

The SEC1210T/PV-UR2 is also equipped with a safety circuit, which is designed to protect the device against overvoltage. If the voltage applied to the terminal exceeds the designed level, the safety circuit will open the circuit and disconnect the load from the power source.

Conclusion

The SEC1210T/PV-UR2 is a versatile SSR interface module that is used in a wide range of applications, from control systems to HVAC systems. Its working principle is based on a MOSFET switch, which allows the device to turn on and off AC loads. The device is also protected by a safety circuit that compensates for overvoltage and prevents damage to the module.

The specific data is subject to PDF, and the above content is for reference