SF1211-66199

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors are widely used in RF applications such as antenna, communication, high frequency test and radio navigation systems. The coaxial connector type SF1211-66199 is mainly used for microwave application in telecommunication systems. This type of connector has an impedance of 50 ohms and was designed for high performance applications. The SF1211-66199 is a single-mode connector, has an operating frequency up to 6 GHz, and is capable of handling up to 5W of power.

The SF1211-66199 is a snap-on type connection and consists of two units, the receptacle and plug. The receptacle has a metallic U-shaped part (which is connected to an electrical connecting cable) and a terminal block. The plug consists of a two-pin, male and female, with an insulated contact in each pin. The plug is also connected to the electrical connecting cable. Both sides of the SF1211-66199 connector are equipped with a conductive sleeve that serves as an electrical ground connection between the plug and the receptacle.

The installation of the receptacle is simple and requires no special tools. In order to install the plug, however, a special tool such as a crimping tool and heat-shrink tubing is necessary. The electrical connection is made by soldering the terminal blocks to the plug and receptacle. The connection can be made mechanical by screwing the plug to the receptacle. After the connection is securely fastened, the sleeve at the end of the plug and the inner walls of the receptacle are hot water sealed in order to ensure a waterproof connection.

The good performance of the SF1211-66199 connector is achieved by a number of factors. Firstly, its tight tolerance ensures the electrical characteristic of the connector. The electrical performance of the connector is also enhanced by the use of a high-grade dielectric material, which provides minimize signal loss. Secondly, the two metal sleeves in the connector act as a shield, effectively protecting the inner parts from any external magnetic field interference.

The SF1211-66199 connector is applicable in numerous fields, such as radio communication and broadcasting, measurement and control industry, and satellite systems. It is suitable for both indoor and outdoor applications due to its watertight seal and corrosion-resistant materials. All of these features make the SF1211-66199 one of the best choices for high frequency and microwave applications.

The specific data is subject to PDF, and the above content is for reference