Allicdata Part #: | 490-1238-ND |
Manufacturer Part#: |
SFELA10M7EA00-B0 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | Murata Electronics North America |
Short Description: | FILTER 10.7MHZ 330KHZ BANDWIDTH |
More Detail: | N/A |
DataSheet: | SFELA10M7EA00-B0 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Contains lead / RoHS non-compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | 0.00000 |
Series: | CERAFIL®, SFELF |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Obsolete |
Moisture Sensitivity Level (MSL): | -- |
Frequency: | 10.7MHz Center |
Impedance: | 330 Ohm |
Bandwidth: | 330kHz |
Insertion Loss: | 4dB |
Filter Type: | FM |
Mounting Type: | Through Hole |
Package / Case: | 3-SIP, 2.50mm pitch |
Size / Dimension: | 0.276" L x 0.118" W (7.00mm x 3.00mm) |
Height (Max): | 0.354" (9.00mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ceramic filters are devices which use ceramic materials in order to filter out certain frequencies from a transmission signal, usually in the radio frequency (RF) range. This can be used to separate different bands of frequencies, to reduce interference and noise, or to eliminate undesired signals. The SFELA10M7EA00-B0 ceramic filter is an example of such a device, and this article will discuss its application field and working principle.
A primary application for the SFELA10M7EA00-B0 ceramic filter is in cellular radio frequency (RF) communications. It is used as a part of the transceiver which modulates and demodulates a radio signal. The filter is used to separate different parts of the signal, such as the uplink and downlink frequencies, while also reducing interference and noise from other signals. This helps to improve the signal-to-noise ratio, as well as increasing the overall quality of the communication.
Another application for the SFELA10M7EA00-B0 ceramic filter is in the filtering of audio signals. This can be used in audio equipment such as amplifiers, mixers, and synthesizers. In these applications, the filter can be used to separate high frequency and low frequency signals, as well as other bands of frequencies. This helps to reduce or eliminate any unwanted noise and interference which can be picked up from a variety of sources.
The SFELA10M7EA00-B0 ceramic filter is also used in antenas, both for transmitting and receiving signals. It is used to separate different frequency bands, and can also be used to reduce interference and noise from outside sources. This is important in applications such as wireless communication, where the antenna is the key to the success of the transmission. In addition, the filter can also be used to eliminate undesired signals from other antenna systems.
The working principle of the SFELA10M7EA00-B0 ceramic filter is based on a number of different properties of the ceramic material. To begin with, ceramic materials are able to absorb particular frequencies of energy, due to their properties such as molecular structure, porosity, and dielectric constant. This allows them to selectively filter out specific frequencies, while also attenuating other frequencies.
The SFELA10M7EA00-B0 ceramic filter also utilizes the effects of surface acoustic waves (SAW) on the ceramic material. This is due to the fact that ceramic materials are capable of producing sound waves, which are then absorbed by the filter. This helps to reduce or eliminate undesired signals, and can also reduce noise and interference.
Finally, the SFELA10M7EA00-B0 ceramic filter also utilizes temperature-dependent electrical properties. This helps to ensure that the filter is able to consistently filter out the desired frequency bands, while also reducing interference and noise.
Overall, the SFELA10M7EA00-B0 ceramic filter is a versatile device which can be used in a variety of different applications. Its utilization of ceramic materials, as well as its ability to selectively filter out certain frequencies, makes it ideal for cellular communications and audio equipment. In addition, the filter’s ability to reduce interference and noise can also make it useful for antena applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SFELA10M7EA00-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 330KHZ BAN... |
SFELA10M7JAA0-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 150KHZ BAN... |
SFELA10M7DF00-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 175KHZ BAN... |
SFELA10M7HA00-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 180KHZ BAN... |
SFELA10M7DF0021-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 200KHZ BAN... |
SFELA10M7GA00-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 230KHZ BAN... |
SFELA10M7FA00-B0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 280KHZ BAN... |
SFELF10M7FAA0-A0 | Murata Elect... | 0.0 $ | 1000 | FILTER 10.7MHZ 280KHZ BAN... |
CER FILTER 2.45GHZ BAND PASS
CER FILTER 10.7MHZ FM
CER FILTER 455KHZ
CER FILTER 455KHZ
CER FILTER 455KHZ
CERAMIC FILTER