SFH600-1X007

Output Type:	Transistor with Base
Supplier Device Package:	6-SMD
Package / Case:	6-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.25V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	2µs, 2.5µs
Turn On / Turn Off Time (Typ):	3.2µs, 3µs
Current Transfer Ratio (Max):	125% @ 10mA
Current Transfer Ratio (Min):	63% @ 10mA
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic OutputOptoisolators are components that work to isolate signals in circuits by using light as the coupling medium. They are often referred to as optocouplers, optical isolators, or isolator optoelectronic devices. SFH600-1X007 Optoisolators are a specific type of transistor, photovoltaic output optoisolator, and may be used in a variety of applications.The optoisolator is a self-contained optoelectronic component, which typically contains a single transmitting and a single receiving element. As such, the device isolates the input signal from the output, and prevents the interference from other circuits and components, such as noise, ground loop current, and radiated interference. This is important in many circuit designs, as it prevents faulty signals from corrupting the entire system, ensuring operators and consumers of the product or service receive a reliable signal.The SFH600-1X007 Optoisolator features a 6-pin, through-hole package. It is sensitive to both visible light and IR light, with a spectral range from 400 nm to 1025 nm. It is rated at 3 mA at 35V, meaning it can withstand higher currents and voltages than some other optoisolators. The device can operate over a wide temperature range, from -55 to +125 Celsius, with a guaranteed isolation voltage of 5 kVrms, which meets the requirements for many applications. The SFH600-1X007 optoisolator works on a photovoltaic output, meaning it produces a voltage potential when it detects light. This voltage potential output then triggers a phototransistor, which amplifies the weak light signal by acting as a low impedance current source. When the optoisolator receives a signal, it is transmitted to the output via light and the phototransistor. This output then behaves as the input, allowing for signals to be transmitted between two isolated circuits. This allows for efficient isolation of signals with minimal loss of signal strength or accuracy.The SFH600-1X007 can be used in a variety of applications, including input protection for microcontrollers and signal interconnects between different boards. It is especially useful in applications which require low-level signal transmission, due to its low power consumption and high isolation voltage. It can also be used in industrial control systems where signals must be isolated to eliminate noise, as well as in automotive systems where signal transmission must be isolated to prevent electric shock. In addition to the SFH600-1X007, there are a variety of optoisolator devices available to suit different applications. As such, it is important to consider the requirements of the particular application, as well as the voltage, current, and temperature specifications needed for optimal operation. With this in mind, the SFH600-1X007 optoisolator is a great choice for many circuit designs, offering reliable isolation of signals with minimal power loss and interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description