SFH601-2X009

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators or optocouplers are devices used for electrical isolation between two circuits, thus allowing two systems, circuits, and grounds to keep their electrical separation. One of the most commonly used optoisolators is the SFH601-2X009. This article will look at the SFH601-2X009’s application field, and its working principle.

Application Field

The SFH601-2X009 falls into the category of optoisolators – Transistor, Photovoltaic Output. This means that its input is an electrical signal and its output is a photovoltaic effect. SFH601-2X009 is typically used to provide electrical isolation between two circuits, allowing them to remain electrically separated while safely sending signals from one to the other. It is particularly useful in cases of high-voltage isolation, as the isolation holds even with a relatively high DC voltage drop. In particular, its most common applications include input power line protection, electrical power isolation for safety systems, and the avoidance of ground loops.

Working Principle

The working principle of the SFH601-2X009 is based on the photovoltaic effect. This effect is the generation of a voltage when photons strike a material. In the SFH601-2X009, the input is an electrical signal while the output consists of a photovoltaic effect. The input signal is converted into light energy by the LED of the device. When the light beam projected by the LED strikes the phototransistor in the SFH601-2X009, it generates, through the photovoltaic effect, a small current which is then amplified by the transistor and outputs an electrical signal. Through the amplification of the small current, which is generated through the photovoltaic effect, the SFH601-2X009 is able to safely output an electrical signal, maintaining electrical isolation between the two circuits.

Conclusion

The SFH601-2X009 optoisolator falls into the category of optoisolators - Transistor, Photovoltaic Output, and is mainly used for electrical isolation between two circuits. Its working principle is based on the photovoltaic effect, and it produces an amplified signal output through the LED’s light projected to the phototransistor, and the resulting current generated by the photovoltaic effect.

The specific data is subject to PDF, and the above content is for reference