SFH608-3X007T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are used to electrically isolate a input from an output. The power,ground, and signal lines of an optoisolator are isolated from each other so that they can not interact with each other. This makes them used in a variety of applications including industrial, consumer, and medical. The SFH608-3X007T is an example of a transistor, photovoltaic output optoisolator from OSRAM Opto Semiconductors.

The SFH608-3X007T opto isolator consists of a LED and a phototransistor in a single 4-pin package. It is most commonly used in applications requiring optical isolation between the input and output such as high voltage switching and DC to DC converters. It also provides voltage isolation up to 5kV. The LED in the SFH608-3X007T opto isolator emits light when a current is applied to the base of the opto isolator. The resulting light is detected by the phototransistor and the transistor is activated/de-activated accordingly.

The working principle of the SFH608-3X007T opto isolator is simple but effective. The LED produces light in response to current applied to its base. The light is then detected by the phototransistor, activating it. The phototransistor is then switched on and off depending on the current through it. This allows for electrical isolation between the input and the output, thus, eliminating interference between them.

The SFH608-3X007T opto isolator can be used in a variety of applications such as motor speed controllers, automotive ECU (electronic CAN bus) and medical instrumentation. In a motor speed controller, the SFH608-3X007T opto isolator is used to isolate the control signals from the power MOSFETs that are controlling the motor. In an automotive ECU, the opto isolator is used to provide isolation between the CAN bus and the control lines. In medical instrumentation, the opto isolator is used to provide isolation between the patient and the circuitry, thus reducing the risk of electric shock.

The SFH608-3X007T opto isolator is a versatile component and can be used in many applications where optical isolation is required. It provides electrical isolation up to 5kV and is capable of switching current up to 500mA with a low ON resistance of 1.2Ω. The SFH608-3X007T opto isolator is thus an efficient and reliable component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference