SFH615A-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of device which electrically isolates two parts of a circuit using the light or radiation generated by one part to turn on the other part. The SFH615A-3 is an optoisolator of the Transistor, Photovoltaic Output type. This part takes advantage of the electrical isolation capability of an optoisolator and the switching speed of the photovoltaic cell.

The main application of the SFH615A-3 is in digital circuits, where it can be used to detect digital signals from an input port and use them to send a signal, without opening the path between the input and output ports and creating ground loops or short circuits. In this way it provides a secure method of connecting two otherwise isolated ports or circuits. Other applications include switching contacts between two points of different voltage, such as neutral and hot side circuits.

The SFH615A-3 is composed of two parts. The first part is an infrared light emitting diode (LED) which generates infrared light when a current passes through it. The second part is a photovoltaic cell which is connected in reverse bias and designed to be turned on when the light from the LED passes through it. The two parts of the optoisolator are kept isolated from each other but are linked by the infrared light connecting them.

The operating principle of the SFH615A-3 is quite simple. When a voltage is applied to the LED it will generate infrared radiation which relates directly to the voltage that is supplied. The amount of light generated is measured in terms of the peak current that passes through it, and the power of the light generated is referred to as its luminosity.

The photovoltaic cell is connected in reverse bias so that it absorbs the light from the LED and turns on. When current passes through the LED, the light will be absorbed by the photoresistor and a voltage is developed. This voltage will be used to turn on the transistor connected to the photovoltaic cell, which in turn will provide an output.

The SFH615A-3 is a useful part for isolating two circuits electrically while allowing for fast switching between them. It is an ideal part for applications where noise needs to be kept to a minimum and secure connections are needed. As the LED and photoresistor are electrically isolated, this part can also provide high levels of noise immunity and be used in safety critical applications.

The specific data is subject to PDF, and the above content is for reference