SFH615A-3XSM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used for electrical isolation between circuits. There are several types of optoisolator, and Transistor, Photovoltaic Output is one of the most popular among them. The SFH615A-3XSM is a Transistor, Photovoltaic Output optoisolator used in various applications.

The SFH615A-3XSM consists of an optically coupled NPN output transistor with internal control circuitry, together with a light-emitting diode and a reverse-biased photodiode. The chip is encased in a TO-92 package. The optoisolator has a maximum power rating of 0.4W and a maximum voltage of 20V. It also has a high CTR (Current Transfer Ratio) which ensures maximum signal transmission.

The SFH615A-3XSM optoisolator has many applications in the industrial, consumer and automotive market. Its small form factor due to its plastic TO-92 package makes it suitable for applications where space is limited. It is used in signal processing, power control, level control, safety monitoring, communications systems, and various other automated control and monitoring systems.

The SFH615A-3XSM optoisolator operates as a switch. Incoming pulses from the input side trigger the light source, which in turn causes the opto-output to change from low to high. This cause the connected load to switch on and off according to the logic of the circuit. The output side responds rapidly to changes in the input side, allowing extremely fast switching times. As the optoisolator has a high current transfer ratio, it is able to switch on and off with minimal loss of power.

The SFH615A-3XSM optoisolator also has a CMOS (Complementary Metal–Oxide–Semiconductor) compatible 1.2V rated input, which further adds to its usefulness. It is fully compatible with standard logic circuits and does not require additional voltage sources or drivers. This makes it perfectly suited for applications where space is at a premium and cost is a consideration.

The SFH615A-3XSM optoisolator is one of the most widely used opto-isolators due to its wide application field and excellent working principle. It is an indispensable device for many of today’s modern electronics, providing a reliable communication link between independent circuits while providing maximum noise immunity and protection.

The specific data is subject to PDF, and the above content is for reference