SFH617A-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, provide electrical isolation between two circuits or systems using optical light to transfer signals or power from one side to the other. This makes them ideal for applications where two systems are not electrically connected, yet need to interact in a safe and reliable manner. The SFH617A-4 is a type of optoisolator that combines a photovoltaic cell and a transistor output, making it well suited for use in small control systems and instrumentation. The following article will discuss the SFH617A-4’s application field and working principle to give a better understanding of its capabilities and limitations.

The SFH617A-4 is a 4-pin optoisolator that is designed for applications where there is a need to couple an input signal on the non-isolated side to a corresponding transistor driver output on the isolated side. It can provide a highly reliable electrical isolation up to 5000VRMS at a frequency of 50/60 Hz, allowing it to operate safely in many industrial settings. The optoisolator is available in a variety of packages, including DIP, SMD, and SMT types.

The SFH617A-4 optoisolator features an integrated photovoltaic cell and transistor output. This allows it to function as a phototransistor, providing an isolated digital, on/off output based on the input signal. When the input signal is off, the output transistor stays in an open-circuit state. When the input signal is on, the photovoltaic cell creates a leakage current that turns the transistor output on. This makes it easy to link two circuits or systems that are not electrically connected, while still ensuring a reliable response.

The SFH617A-4 optoisolator is suitable for use in a variety of applications. It can be used for industrial automation monitoring and control systems, as well as biomedical equipment and other instrumentation. It is also well suited for use in automotive systems where reliable electrical isolation is needed. The optoisolator can function as either a digital or analog switch, depending on the application.

In terms of the working principle, the SFH617A-4 optoisolator transistor output is operated by the input signal from the non-isolated side. When the operating voltage is applied to the LED on the non-isolated side, the photovoltaic cell creates a leakage current that turns on the transistor output on the isolated side. The required input voltage is typically in the range of 2.5 to 5.5V, and the current that flows through the LED must not exceed 1 mA for proper operation.

The SFH617A-4 optoisolator also features a high forward voltage (Uf) of 0.9 V and a very low saturation voltage (Ucs) of 0.12 V. This means the transistor output current will increase in proportion to the increase in input LED current. This also means that the optoisolator will offer a very high dynamic response, allowing it to accurately detect and respond to changes in the input signal.

Overall, the SFH617A-4 optoisolator is a reliable and highly functional device that can be used in a variety of applications where electrical isolation is required. Its integrated photovoltaic cell and transistor output make it suitable for use in small control systems and instrumentation. It can be used for industrial automation monitoring and control systems, biomedical equipment, automotive systems and more. The SFH617A-4 offers a high level of reliability and excellent dynamic response, making it a great choice for most optoisolator applications.

The specific data is subject to PDF, and the above content is for reference