SFH6206-1T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used to electrically isolate two sections of a system. The SFH6206-1T “PhotoVoltaic” device is one of these optoisolators. With an insulation voltage of 500V, it is designed to provide a high level of insulation between the input and the output, enabling two even high power circuits to coexist without interference from one another. 

The SFH6206-1T is designed for specific applications such as isolating the gates of FETs and MOSFETs, or other sensitive electronic circuits, from the input circuit.  It is suitable for a wide range of waveforms such as sine wave, square wave, and pulse current. It has a low direct current of 100uA, resulting in low power loss and improved efficiency. It also increases the reliability of the system by reducing interference and disturbance.

The SFH6206-1T operates with the principle of photon modulation. It consists of a semiconductor emitter (LED), a modulator (photodiode), and a transimpedance amplifier. As the LED is excited with current, it emits photons that can pass through the air gap between the LED and the usually metalized photodiode. When the photons strike the photodiode, it is excited and generates a small current, which is then amplified by the use of a transimpedance amplifier. The amplified current is then sent to the circuit that is to be isolated from the input circuit. 

The SFH6206-1T’s design has a wide range of application possibilities. It can be used in voltage regulator circuits, optoelectro-mechanical interfaces, digital signal isolation, as well as analog and digital audio interface isolation in hybrid systems. It is also quite useful as a high-speed interface in Ethernet applications, measuring systems, and communication systems. It supports a current transformer, allowing data transmission between two nodes without the risk of open circuit or short circuit failures.

The SFH6206-1T PhotoVoltaic optoisolator is a reliable and cost-effective way to ensure high voltage isolation between two circuits. Its wide application field, wide range of waveforms, and low power loss make it an invaluable tool for many systems that need to ensure a safe and reliable connection between the input and the output. The device has a wide range of application possibilities, including voltage regulator circuits, optoelectro-mechanical interfaces, digital signal isolation, and communication systems.

The specific data is subject to PDF, and the above content is for reference