SFH636

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, are electronic devices used to couple electrical signals between two subsections of an electrical or electronic system. The most common type of optoisolator is the Transistor, Photovoltaic Output (SFH636) which is used to isolate low-voltage systems from high-voltage systems, allowing for a safe connection between the two. This article discusses the application field and working principle of the SFH636 optoisolator.

Application Field

The SFH636 is designed primarily for use in optoelectronic systems. It is used to prevent noise from one section of the system from interfering with the other section. The SFH636 is ideal for data communications and other applications that require signal isolation. It can also be used for applications such as light sensing, light emitting devices, and light detection.

The SFH636 is capable of controlling both analog and digital signals. It is commonly used in a variety of power control, monitoring, and switching applications. It is capable of isolating signals from AC mains and low-power devices, making it ideal for use in medical device applications, where patient safety and performance are of utmost importance.

The SFH636 is a high performance optoisolator. It is capable of handling up to 150mA of source current, and up to 1kV of insulation voltage. It can also operate over a wide temperature range, from -40 to 110 degrees Celsius.

Working Principle

The SFH636 optoisolator is a transistor-output optoisolator. It works by converting a current-carrying input signal into a voltage-carrying output signal, isolating the two circuits. The optoisolator consists of an input side and an output side. Light from the input side is directed to a photodetector on the output side, converting it to a voltage signal. The signal is then amplified and passed through the output transistor.

On the input side, the optoisolator consists of an LED emitter and a current-limiting resistor. The LED is triggered by an input current, emitting light that is received by a photodetector on the output side. This photodetector is typically made up of a reverse-biased LED. When the light arrives at the photodetector, it is converted into a voltage signal.

The voltage signal is then amplified by a current gain amplifier before being passed through the transistor. The transistor serves as an intermediate between the input and output circuit, isolating the two while allowing current to pass between them. This process is reversed when the signal passes from the output to the input side, again isolating the two circuits.

The SFH636 optoisolator is an effective way of providing signal isolation in various electronic systems. It offers high performance, while providing maximum safety. The SFH636 is suitable for use in both analog and digital systems, making it a versatile option for a variety of applications.

The specific data is subject to PDF, and the above content is for reference