SFH6702

Data Rate:	5MBd
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 15 V
Current - DC Forward (If) (Max):	10mA
Voltage - Forward (Vf) (Typ):	1.6V
Rise / Fall Time (Typ):	40ns, 10ns
Propagation Delay tpLH / tpHL (Max):	300ns, 300ns
Series:	--
Current - Output / Channel:	25mA
Output Type:	Push-Pull, Totem Pole
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	5300Vrms
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SFH6702 is a logic output optoisolator that is used for the electrical isolation of two circuits. This device is composed of a GaAlAs infrared light-emitting diode (LED) coupled with a high gain monolithic silicon detector. The LED emits light when the input voltage is applied, and the monolithic silicon detector converts the light to an output current. The current is then used to control a load device such as a transistor in a logic circuit. The electrical isolation between the input and output is provided by a physical barrier within the package.The SFH6702 optoisolator is designed to provide current switch logic voltage level isolation between equipment at a rated isolation voltage of up to 5000 Vrms. It is capable of transmitting very low logic level voltages or currents of up to 10 mA. The logic level isolation provided by the SFH6702 is the key to its successful implementation in a variety of applications.The SFH6702 optoisolator device is designed to be used in a variety of logic output circuits and applications, including digital logic interfaces, voltage or current output isolation in programmable logic controllers (PLCs), and communication and automation systems. It can also be used in applications such as industrial safety systems, electronic motor control, alarm systems, and programmable relays.The SFH6702 is a very versatile device that is used in a wide variety of applications. In most applications, the SFH6702 is used as a current switch, with the input voltage (VIN) being used to control the current output. In this configuration, the logic circuit connected to the output is activated when the input voltage exceeds the threshold voltage of the device.The working principle of the SFH6702 is based on the principle of electrical isolation. When the input voltage is applied to the device, the LED emits light which is detected by the monolithic silicon detector. This causes an electrical potential to be created in the output of the SFH6702, which is then used to control an external load device.The SFH6702 optoisolator is a highly reliable device that provides logic output voltage level isolation between systems. It is an ideal choice for many applications requiring high voltage isolation and operating in harsh environmental conditions. Its small size and wide temperature range make it suitable for use in even the most demanding applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description