SFR16S0001372FR500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are commonplace components found in hundreds of applications across a variety of industries. The SFR16S0001372FR500 is an example of a through-hole resistor. Despite their relative simplicity, these components are essential for many circuits.

At the core, through-hole resistors are a combination of three separate components. First, there is the resistor material itself. Common resistor materials such as carbon films, metal films, and wirewounds are used. Second, there is the housing, or body. This plastic housing contains the resistor material and helps protect the resistor from environmental influences. Third, there is the lead or wire. This is the interface that allows electrical connection between the resistor and the device’s circuit board.

The properties of a through-hole resistor are determined by a few specifications. The power rating, expressed in watts, determines the maximum amount of energy the resistor can dissipate. The resistance, expressed in ohms, determines the amount of current allowed to travel through the component. The tolerance, expressed as a percentage, indicates how precise the resistor’s resistance value is. The SFR16S0001372FR500 has a power rating of 0.5 watts, a resistance of 370 ohms, and a tolerance of 5%.

The SFR16S0001372FR500 is a useful component in many different applications. Because of its exterior components, one of its most common uses is in electrical circuits that are exposed to mechanical impacts. The resistor’s plastic housing is designed to withstand minor shocks, so it is suitable for applications where the circuit is likely to be disturbed. Additionally, because of its low resistance value and relatively good tolerance, the SFR16S0001372FR500 is commonly used in circuits that require a precise resistance value. Its low power rating means that it should not be used in circuits with high power requirements.

The working principle of a through-hole resistor is straightforward. When an electrical current passes through the resistor, the electric field of the current causes electrons in the resistor material to vibrate. This vibration generates heat, resulting in a phenomenon known as Joule heating. As a result, the resistor will dissipate some of the energy of the electrical current in the form of heat. The resistor determines how much current is allowed to flow through the circuit by resisting the flow of electrons. The amount of resistance is determined by the material and the size of the resistor, and the current is limited according to Ohm’s law.

In summary, the SFR16S0001372FR500 is a through-hole resistor with a power rating of 0.5 watts, a resistance of 370 ohm, and a tolerance of 5%. Additionally, the SFR16S0001372FR500 is suitable for use in electrical circuits that require a precise resistance value and are exposed to mechanical impacts. Finally, the working principle of a through-hole resistor is that it limits the flow of electrons through a circuit by creating resistance and dissipating the energy in the form of heat.

The specific data is subject to PDF, and the above content is for reference