Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches

The SG-B1-MA-G1 series snap action, limit switch is a three-legged, low amperage, single-pole double-throw (SPDT) switch. It has a momentary contact and is used to detect the presence of an object or limit its movement. The SG-B1-MA-G1 series switch is a low cost solution that offers greater convenience, accuracy and reliability compared to other conventional moments-of-force switches.

The SG-B1-MA-G1 series switch is a versatile switch that can be used in a wide range of applications. It can be used to detect the presence of an object, such as a door or ladder; to limit the motion of an object; and for panel board control. It can also provide useful information to an alarm system, allowing it to activate the proper response when an object enters the range of detection.

The SG-B1-MA-G1 series switch has a robust design that makes it highly resistant to vibration, shock, and extreme temperature. Additionally, its low power draw allows it to be powered by 12 to 24 volts AC/DC, and it is of the same design and size as many other currently available switchmaking it easy to replace existing switches.

The SG-B1-MA-G1 series switch works in two ways. In one mode, it is used as a momentary switch, meaning that it must be manually activated to begin the sequence of events, and then will remain on and active until manually reset. In the other mode, it is in a continuous loop, where it is activated and deactivated in response to movements or interruptions in the environment.

To use the SG-B1-MA-G1 switch as a momentary switch, two wires are connected to the switch and two wires are connected to the device or machine being monitored. When the switch is manually activated, it completes the circuit and the device or machine is powered. When the switch is reset, the circuit is broken and the device or machine is powered down. To use the SG-B1-MA-G1 switch as a continuous switch, four wires are required, two for the switch, and two for the machine or device.

When the switch is connected to the device or machine, the two wires connected to the switch will constantly be sending an electrical signal. When the switch is activated or interrupted, the signal will change and the device or machine will respond accordingly. The SG-B1-MA-G1 series switch can be adjusted and programmed to detect different levels of presence or interruption, making it ideal for applications ranging from door and window monitoring to environmental control.

The SG-B1-MA-G1 series of snap action, limit switches can be used in a variety of applications to monitor the presence of an object or to limit its movement. It has a robust design and requires minimal power to operate. It is easy to replace existing switches and can be adjusted and programmed for different applications. It is designed to provide reliable and accurate detection, making it a cost-effective solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference