| Allicdata Part #: | 570-1445-ND |
| Manufacturer Part#: |
SG416 |
| Price: | $ 0.85 |
| Product Category: | Circuit Protection |
| Manufacturer: | Ametherm |
| Short Description: | ICL 1.3 OHM 25% 8A 14MM |
| More Detail: | Inrush Current Limiter 1.3 Ohms ±25% 8A 0.550" (13... |
| DataSheet: |  SG416 Datasheet/PDF |
| Quantity: | 1000 |
| Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
| 1 +: | $ 0.76860 |
| 5 +: | $ 0.74214 |
| 10 +: | $ 0.69426 |
| 50 +: | $ 0.57456 |
| 100 +: | $ 0.47880 |
| 250 +: | $ 0.46683 |
| 500 +: | $ 0.39501 |
| 1000 +: | $ 0.34713 |
| 5000 +: | $ 0.31122 |
| Series: | SURGE-GARD™ |
| Part Status: | Active |
| Moisture Sensitivity Level (MSL): | -- |
| R @ 25°C: | 1.3 Ohms |
| Tolerance: | ±25% |
| Current - Steady State Max: | 8A |
| R @ Current: | 50 mOhms |
| Diameter: | 0.550" (13.97mm) |
| Lead Spacing: | 0.310" (7.87mm) |
| Approvals: | CSA, UR |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inrush Current Limiters (ICL) are a type of device used to prevent large current spikes, which can occur in an electrical system when it is powered up. The SG416 is an example of an ICL. This device is typically installed in commercial and industrial systems, such as air conditioning systems.
The purpose of an ICL is to prevent high voltage and current spikes from damaging sensitive components. By limiting the current allowed through the device at startup, it can protect the system from damage. Additionally, ICLs can help maintain system stability by preventing overloads.
The SG416 is an ICL designed to limit inrush current in a range from 8A to 400A. It consists of a movable contact that is held closed by a plunger spring. When the power is turned on, the contact separates. This creates a gap in the circuit that limits the current flowing through the device.
The SG416 is typically installed in parallel with the system or component that it is protecting. When power is applied to the device, the movable contact splits and begins to separate. As the current passes through the device, it is limited by the resistance that exists in the gap. This limits the amount of current that can pass through and into the rest of the system.
Once the current reaches the maximum level, the contact recombines, completing the circuit and allowing full current to flow from the supply to the rest of the system. This process is repeated over and over until the system stabilizes and reaches its operating current level.
The SG416 is a reliable and efficient device that can help protect systems and components from damage that can occur when current spikes occur. It is well-suited for a variety of industrial and commercial applications and can be used to help increase the reliability and longevity of a variety of systems.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| SG416 | Ametherm | 0.85 $ | 1000 | ICL 1.3 OHM 25% 8A 14MMIn... |
ICL 1.3 OHM 25% 8A 13.97MMInrush Current...
ICL 10 OHM 20% 5A 12MMInrush Current Lim...
ICL 4 OHM 20% 23A 30MMInrush Current Lim...
ICL 16 OHM 20% 4A 22MMInrush Current Lim...
ICL 16 OHM 25% 4A 19.56MMInrush Current ...
ICL 33 OHM 20% 2.5A 15MMInrush Current L...