SG7050CCN 3.686400M-HJGA3

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	10mA
Height - Seated (Max):	0.059" (1.50mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	20mA
Operating Temperature:	-40°C ~ 85°C
Series:	SG7050
Voltage - Supply:	4.5 V ~ 5.5 V
Output:	CMOS
Function:	Enable/Disable
Frequency:	3.6864MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IntroductionSG7050CCN 3.686400M-HJGA3 oscillator is a type of electronic device used to generate a periodic, oscillatory signal for use in various wireless communication applications. It is a member of the family of devices known as Phase-Locked Loop (PLL) oscillators, which are used to generate a wide range of operating frequencies.Application FieldThe SG7050CCN 3.686400M-HJGA3 oscillator is typically used in wireless communication applications, particularly in Ultra-Wideband (UWB) systems. UWB is a type of short-range wireless communication system that enables data transfer speeds around 1 Gbit/s. UWB systems are used in a wide range of applications, including point-to-point communication (for example, in home networks or between mobile devices) as well as in sensor networks (for example, in medical and defense applications).The SG7050CCN 3.686400M-HJGA3 oscillator is also used in a variety of other applications, such as in consumer electronics (for example, in mobile phones and digital cameras), in industrial applications (for example, in robotics or factory automation), and in medical imaging applications (in order to ensure the accuracy and precision of the images).Working PrincipleThe SG7050CCN 3.686400M-HJGA3 oscillator is based on a Phase-Locked Loop (PLL) design. A PLL is a type of feedback control system that creates a stable output signal by maintaining frequency and phase lock between two oscillators. The output of one of the oscillators is used as the reference signal, while the output of the other oscillator is used as the input signal. The control circuit adjusts the phase and/or frequency of the input signal to match that of the reference signal in order to produce a stable output from the PLL.The SG7050CCN 3.686400M-HJGA3 oscillator is composed of an input frequency reference, a voltage-controlled oscillator (VCO), a phase detector, and a low-pass filter. The input frequency reference is used to determine the output frequency of the PLL. The reference frequency is fed into the phase detector, which compares the phase of the reference signal to the phase of the VCO output. The phase detector then generates an error signal, which is fed to the VCO. The VCO adjusts the frequency of its output based on the error signal from the phase detector. The output of the VCO is then filtered by the low-pass filter, producing a stable output signal at the desired frequency.ConclusionSG7050CCN 3.686400M-HJGA3 oscillator is an example of a Phase-Locked Loop oscillator that is used in a variety of wireless communication and other applications. This oscillator is based on the comparison of the phase of an input reference signal and the phase of the output signal of a voltage-controlled oscillator. The phase detector then generates an error signal, which is used to adjust the output of the VCO. The output of the VCO is then filtered and used as a stable output signal at the desired frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description