SH150T-0.56-55

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components used in electrical circuits that provide inductance, a property that resistance has that opposes the flow of alternating current. These components are very important because they can be used to store and then release energy when necessary. One example of a fixed inductor is the SH150T-0.56-55.

The SH150T-0.56-55 inductor is part of a series of components released by a global electronics component manufacturer. It is a small, two-tier axial inductor with a total size of 9.5 x 6.2 x 5.5 mm. The inductance is measured in millihenries, a unit of measurement used to measure the amount of current passing through a device, and the value of the SH150T-0.56-55 is 0.56 mH. The series also includes inductors with a large inductance of 55 mH.

The SH150T-0.56-55 inductor has a high saturation current, meaning it can tolerate high levels of current without getting damaged. It also has a low DC resistance, allowing for efficient operation at low powers. The SH150T-0.56-55 is rated for a maximum operating temperature of 85 degrees Celsius. The inductor is constructed of a composite material of ceramic, copper, and silicone which makes it resistant to corrosion. This makes it a good choice for many applications.

The most common application of the SH150T-0.56-55 is for filtering. It can be used to filter out high-frequency signals or noise in electronic circuits. This is due to its high saturation current and resistance to DC. The inductor can also be used to provide AC current to a device, such as a radio or amplifier, where it can be used for processing. Other applications include energy storage in power supplies, and in filters for suppressing interference.

The working principle of the SH150T-0.56-55 is based on the concept of Faraday\'s law of induction. Faraday\'s law states that an electric current produces a magnetic field and vice versa. When a current is passed through the SH150T-0.56-55, the magnetic field created by the current induces a current in the inductor itself. This induced current is known as an "induced current" or "back emf," which opposes the flow of the original current. This creates an opposing current in the inductor, which reduces the amount of energy in the original current.

In conclusion, the SH150T-0.56-55 inductor is used for filtering, providing AC current to devices, and energy storage. It has a high saturation current and a low DC resistance, and is constructed of a composite material of ceramic, copper, and silicone. Its working principle is based on Faraday\'s law of induction in which the current induces a current in the inductor itself. These are the characteristics that make the SH150T-0.56-55 an ideal component for many applications.

The specific data is subject to PDF, and the above content is for reference