SI-50207-F

LED Color:	Green, Yellow - Green, Yellow
Housing Material:	Thermoplastic
Shield Material:	Copper Alloy
Contact Finish Thickness:	50.0µin (1.27µm)
Operating Temperature:	--
Contact Finish:	Gold
Contact Material:	Copper Alloy
Tab Direction:	Up
Features:	Board Guide
Shielding:	Shielded
Number of Cores per Jack:	5
Series:	MagJack® ST SI-50000
Height Above Board:	0.550" (13.97mm)
Termination:	Solder
Orientation:	90° Angle (Right)
Mounting Type:	Through Hole
Applications:	10/100 Base-T
Number of Rows:	1
Number of Ports:	1
Connector Type:	RJ45
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SI-50207-F is a modular jack with magnetics, a type of connector commonly used to make low- and medium-speed data connections. It is typically used to connect consumer electronics such as TVs, tablets, and laptops. The SI-50207-F is a four-pole jack, which means it has four separate contacts for data, power, and grounding allowing for more efficient electrical connections than standard two-pole jacks.

Application Field

The SI-50207-F is a popular choice for applications in consumer electronics and computer networking. It is designed to provide a reliable connection with low noise and low crosstalk for data rates up to 10 Mbps. It is also designed to provide reliable connections for power up to 500mA at 5V. The SI-50207-F is commonly used in consumer electronics such as TVs, Blu-Ray players, gaming consoles, and video streaming boxes. It is also used in laptop computers, tablets, and many other types of consumer electronics. The SI-50207-F is also commonly used in networking applications, such as home and office networks, Ethernet switches, and other networking devices.

Working Principle

The SI-50207-F Jack with Magnetics utilizes magnetic shielding technology to ensure reliable, low-noise connections. The four-pole jack is designed to reduce interference between signal lines, and its magnetic shielding helps to reduce crosstalk. When the SI-50207-F is mated to a compatible plug, two magnetic cores are used to magnetically couple the device and shield the inner metal conductors from interference. This helps to minimize crosstalk while providing an efficient electrical connection. The SI-50207-F also has two screw-down terminals that are used to ground the jack, helping to reduce noise and interference.

Conclusion

The SI-50207-F jack with magnetics is a popular connector choice for use in a variety of consumer electronics and networking applications. Its magnetic shielding helps to reduce crosstalk and noise, while its four-pole design helps to reduce interference between signal lines. The SI-50207-F is designed to ensure reliable connections for data up to 10 Mbps, and power up to 500mA at 5V.

The specific data is subject to PDF, and the above content is for reference