Allicdata Part #: | SI-52006-F-ND |
Manufacturer Part#: |
SI-52006-F |
Price: | $ 0.00 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Stewart Connector |
Short Description: | CONN MAGJACK 1PORT 100 BASE-T |
More Detail: | 1 Port RJ45 Magjack Connector Through Hole 10/100 ... |
DataSheet: | SI-52006-F Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
LED Color: | Green - Yellow |
Housing Material: | Thermoplastic |
Shield Material: | Copper Alloy |
Contact Finish Thickness: | 50.0µin (1.27µm) |
Operating Temperature: | -40°C ~ 85°C |
Contact Finish: | Gold |
Contact Material: | Copper Alloy |
Tab Direction: | Up |
Features: | Board Guide |
Shielding: | Shielded, EMI Finger |
Number of Cores per Jack: | 4 |
Series: | MagJack® ST SI-50000 |
Height Above Board: | 0.550" (13.97mm) |
Termination: | Solder |
Orientation: | 90° Angle (Right) |
Mounting Type: | Through Hole |
Applications: | 10/100 Base-T, AutoMDIX |
Number of Rows: | 1 |
Number of Ports: | 1 |
Connector Type: | RJ45 |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to SI-52006-F Modular Connectors - Jacks With Magnetics
The SI-52006-F is a modular connector jack with integrated magnetics that is part of a larger family of modular connectors known as Jacks With Magnetics. It is a combination of a power connector jack and a transformer module, providing an easy to use, 100% shielded, 2-position solution for medical and industrial power applications.
Types of Modular Connectors - Jacks With Magnetics
Modular Connectors - Jacks With Magnetics are generally categorized into two main types: 1-position and 2-position. These two main types are further broken down into several different series, each with their own unique features and characteristics.
1-position connectors employ a single integrated magnetics module. This type is typically used in pluggable and PCB applications, such as the connectors commonly seen in medical equipment and low-voltage power applications. In this configuration, the module is typically attached directly to the terminal post of a dedicated power connector.
2-position connectors utilize two integrated magnetics modules connected by a common header. This type is typically used in larger, high-current industrial applications. In this configuration, the modules are usually connected by a header post that is mounted to the power connector. This enables the connector to provide two separate functions, such as in/out power.
Application and Performance of SI-52006-F Modular Connectors - Jacks With Magnetics
SI-52006-F is a type of 1-position modular connector - Jack With Magnetics. This type is ideal for pluggable and PCB applications as the module is commonly integrated directly into the header post of a dedicated power connector. This provides an efficient signal routing solution, as the integrated magnetics provide the necessary filtering between the power connector and the device being powered.
The SI-52006-F provides a wide operating temperature range (-40°C to +85°C), a low insertion force, and a rated current of 2A. This makes it suitable for many industrial and medical applications, such as electromechanical equipment, point-of-care systems, medical imaging equipment and more.
Design and Construction of SI-52006-F Modular Connectors - Jacks With Magnetics
The SI-52006-F modular connector - Jack With Magnetics is constructed of a 14-Pin male header with integrated magnetics module, a gold power connector with threaded locking mechanism, and a black plastic cover. The screw-on cover seals the power connector and provides an IP67 environmental rating. The molded housing has a dielectric strength of 250VAC and operates up to an operational temperature of +85°C.
The magnetic module of the SI-52006-F is an HSR2520 transformer module, which provides 2000 Vdc isolation and a surge rating of 1500V. The power connector is rated to 2A and complies with the RoHS directive.
Conclusion
The SI-52006-F is a modular connector - Jack With Magnetics designed for high efficiency, low profile, and performance in a variety of applications. With its easy to use 1-position design, power connector, and integrated magnetics module, it is a reliable and cost-effective solution for many medical and industrial power applications.
The specific data is subject to PDF, and the above content is for reference
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 12PORT 1000 BASE-TX12 Port ...
CONN MAGJACK 12PORT 100 BASE-TX12 Port R...