| Allicdata Part #: | SI-60107-F-ND |
| Manufacturer Part#: |
SI-60107-F |
| Price: | $ 0.00 |
| Product Category: | Connectors, Interconnects |
| Manufacturer: | Stewart Connector |
| Short Description: | CONN MAGJACK 1PORT 100 BASE-T |
| More Detail: | 1 Port RJ45 Magjack Connector Through Hole 10/100 ... |
| DataSheet: |  SI-60107-F Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| LED Color: | Green - Yellow |
| Housing Material: | Thermoplastic |
| Shield Material: | Copper Alloy |
| Contact Finish Thickness: | 50.0µin (1.27µm) |
| Operating Temperature: | -- |
| Contact Finish: | Gold |
| Contact Material: | Copper Alloy |
| Tab Direction: | Down |
| Features: | Board Guide |
| Shielding: | Shielded, EMI Finger |
| Number of Cores per Jack: | 4 |
| Series: | MagJack® ST SI-60000 |
| Height Above Board: | -- |
| Termination: | Solder |
| Orientation: | 90° Angle (Right) |
| Mounting Type: | Through Hole |
| Applications: | 10/100 Base-T, AutoMDIX |
| Number of Rows: | 1 |
| Number of Ports: | 1 |
| Connector Type: | RJ45 |
| Part Status: | Active |
| Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Modular Connectors - Jacks With Magnetics have been used in a variety of applications. One of the most popular uses is the SI-60107-F. This type of jack is designed to provide DC power and is commonly found in industrial applications, from power tool batteries and chargers to other types of DC power supplies.
The SI-60107-F consists of a molded plastic chassis and an integrated ferrite core connector. This core connector gives the part the advantage of extremely low RF interference, preventing signal distortion. The chassis can also include up to four integral antenna to further reduce RF interference. The 2.5mm jack has a positive contact ground and two insulated contacts, each of which is capable of supporting up to 5A.
The SI-60107-F jack is widely used in industrial, automotive, and consumer electronics applications. It is found in power tool batteries, telephones, vending machines, and many other devices. It is also used in chargers, switch boxes, temperature controllers, and other applications that require a reliable connection to a DC power source.
The working principle of the SI-60107-F jack is based on the ferrite core. It is designed to provide extremely low RF interference and ensure signal integrity. The ferrite core acts as an isolated electromagnetic shield, preventing any external electromagnetic interference from affecting the signal. Additionally, the cavity within the ferrite core helps to reduce noise, providing a cleaner signal.
The SI-60107-F jack is commonly used with DC power sources. To connect the jack to the power source, the user must first identify and verify the power type, voltage, and current of the power source. Once these parameters have been established, the user can then connect the two contacts on the jack to the corresponding positive and negative terminals of the power source.
The SI-60107-F is a durable and reliable source of DC power. It is designed to provide low levels of RF interference, and it is easy to install and maintain. The jack is also widely used in industrial and consumer electronics applications, making it an ideal choice for any application requiring reliable and secure DC power connections.
The specific data is subject to PDF, and the above content is for reference
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 12PORT 1000 BASE-TX12 Port ...
CONN MAGJACK 12PORT 100 BASE-TX12 Port R...