Allicdata Part #: | SI-60190-F-ND |
Manufacturer Part#: |
SI-60190-F |
Price: | $ 12.17 |
Product Category: | Connectors, Interconnects |
Manufacturer: | Stewart Connector |
Short Description: | CONN MAGJACK 6PORT 100 BASE-T |
More Detail: | 6 Port RJ45 Magjack Connector Through Hole 10/100 ... |
DataSheet: | SI-60190-F Datasheet/PDF |
Quantity: | 1000 |
48 +: | $ 11.06580 |
Series: | MagJack® ST SI-60000 |
Packaging: | Tray |
Part Status: | Active |
Connector Type: | RJ45 |
Number of Ports: | 6 |
Number of Rows: | 1 |
Applications: | 10/100 Base-T |
Mounting Type: | Through Hole |
Orientation: | 90° Angle (Right) |
Termination: | Solder |
Height Above Board: | 0.545" (13.84mm) |
LED Color: | Does Not Contain LED |
Number of Cores per Jack: | 1 |
Shielding: | Shielded, EMI Finger |
Features: | Board Guide |
Tab Direction: | Down |
Contact Material: | Copper Alloy |
Contact Finish: | Gold |
Operating Temperature: | -- |
Contact Finish Thickness: | 50.0µin (1.27µm) |
Shield Material: | Copper Alloy |
Housing Material: | Thermoplastic |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Modular Connectors - Jacks With Magnetics comprise a wide range of multi-pin connectors. These connectors are used to direct and connect electric signals to different electrical devices.SI-60190-F is a connector that is mainly used in Ethernet applications. It is a two-part mating system which supports up to seven connections. This type of connector is used when protection against external electromagnetic interference (EMI) and physical stress is required.
The SI-60190-F connector uses a magnetic jack style interface which has several advantages over traditional printed circuit board mount connectors. The connector utilizes an integral magnet design, which is a single progressive-depth structure that produces a stable connection even in the most extreme environmental conditions. magnets help to provide superior signal integrity to reduce signal distortions, which is critical in high speed data communications. Furthermore, magnetic jacks are designed with a low profile which allows for a much smaller footprint than the traditional printed board mount connectors. This can help to make the electronic device easier to install.
The SI-60190-F connector utilizes a circular style cable with up to seven contacts with 50 Ohms impedance. The contacts are gold plated and the connector is constructed with an insulator that contains flame retardant Lloyds register of shipping (LRS) grade material. This insulator ensures that the connector is safe to handle and that it will remain stable during operation.
The SI-60190-F interface has two working modes – DC mode and AC mode. The DC mode is the normally used working mode, which will allow the connector to carry low levels of electrical current, typically below 200 milliamps. The AC mode works to increase the electrical signal for higher levels of electrical current, typically between 200 and 400 milliamps.
When using the DC mode of operation, the SI-60190-F connector can be installed onto a panel with no additional entries. However, when using the AC mode of operation, a soldered entry onto the panel is required, to ensure it is properly grounded and protected from EMI. The SI-60190-F connector is typically used in applications where protection from external EMI is essential.
The SI-60190-F connector is most commonly used in cable television, telecommunication, aerospace, and military applications that require good signal integrity. It is also frequently employed in networking systems. This connector is ideal for carrying data signals over petite distances and minimizing signal distortions due to it’s magnetically shielded design.
The SI-60190-F connector is most effective in applications where a stable connection and EMI protection is needed. Its magnetic jack design is well suited for high data rates and extreme environmental conditions. Its smaller footprint than traditional printed board mount connectors also allows the connector to be easily installed in tight spaces. With its reliable performance and robust design, the SI-60190-F connector is a great choice for many types of electronic applications.
The specific data is subject to PDF, and the above content is for reference
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 1PORT 100 BASE-T1 Port RJ45...
CONN MAGJACK 12PORT 1000 BASE-TX12 Port ...
CONN MAGJACK 12PORT 100 BASE-TX12 Port R...