SIT1602AI-13-33E-12.000000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

As a member of the oscillator family, the SIT1602AI-13-33E-12.000000D is a type of oscillator that works by providing an alternating current or voltage signal at a desired frequency. It works in such a way that it creates a periodic and uninterrupted waveform by making use of oscillating elements such as resistors, capacitors and inductors. In essence, it is a device that takes in energy from an outside source like a battery or from the power line, and then converts it to a signal with a given frequency.

It has application areas in a wide range of sectors, such as telecommunications, instrumentation, consumer electronics, medical equipment, automotive industry, and aerospace. It is especially suited for use in high-frequency applications, such as in radio frequency receivers, digital instruments, broadcast equipment, GPS systems, and other similar devices. The use of this oscillator is limited mainly to signals with frequencies up to several hundred megahertz.

The working principle of the SIT1602AI-13-33E-12.000000D is based on the basic principal of resonance. The oscillator consists of a series of non-linear circuits, which are driven by an internal clock circuit. The oscillator circuit consists of a timing capacitor, a timing resistor, and a voltage controlled oscillator. The oscillator generates an alternating waveform with the desired frequency, by maintaining a feedback loop. This feedback loop is formed by the charging and discharging of the timing capacitor.

The voltage controlled oscillator or VCO, is the main factor in the oscillators performance. It controls the amount of time required for the oscillations to occur, by varying the voltage level applied to it. When the voltage is increased, the charging and discharging of the capacitor occur at a faster rate, and this in turn causes the oscillations to increase in frequency. By controlling the voltage applied to the VCO, the frequency of the oscillations can be accurately controlled.

The SIT1602AI-13-33E-12.000000D oscillator is typically used in applications such as frequency synthesis, demodulation, phase locked loops, signal filtering, sinusoidal waveforms, and waveform generation. In frequency synthesis, the oscillator is used to generate frequencies of specific values, which can then be used to control the operation of other circuits. Demodulation is used to receive and process amplitude modulation and frequency modulation signals, which can be used to extract information from the sources that are broadcasting them. Phase locked loops are often used to detect the presence of a signal and to keep the receiver\'s frequency in synchronization with the transmitter. Lastly, the oscillator can be used to produce a wide variety of waveforms, which can then be used in a diverse range of applications.

The SIT1602AI-13-33E-12.000000D oscillator is an essential component of many of today’s electronic devices, as it is able to generate a wide range of frequencies with a high degree of accuracy. Its compact size, cost efficiency and reliability make it a popular choice for many applications. It is also capable of providing consistent and uninterrupted waveforms when needed. Consequently, it is a favorite among both hobbyists and professionals alike.

The specific data is subject to PDF, and the above content is for reference