SIT1602AIU1-18E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable Oscillators are electronic components that are designed to generate a desired frequency. The application and working principle of the SIT1602AIU1-18E oscillator offer the flexibility of having a wide range of programmable frequency selections in a single device. The SIT1602AIU1-18E Programmable Frequency Oscillator uses a serial interface to program the desired frequency and parameters. This oscillator is ideally suited for applications such as frequency generation, radio frequency transmission and reception of signals, clock synchronization in multi-frequency systems, and baud rate generation.

Application of SIT1602AIU1-18E Programmable Frequency Oscillator

The SIT1602AIU1-18E Programmable Frequency Oscillator is used in a wide range of applications, from consumer electronics to communication systems. In consumer electronics, these oscillators are often used in portable radios, VCRs, digital cameras, and similar products. In communications systems, it is used for frequency synthesizers, radio communications, and radio frequency (RF) signals. It can also be used for clock synchronization in multiple frequency systems and for baud rate generation.

Requirements for the Application of SIT1602AIU1-18E Programmable Frequency Oscillator

The SIT1602AIU1-18E Programmable Frequency Oscillator can be used in a variety of applications, but certain requirements must be met. The oscillator must be able to accurately produce the desired frequency. It must have a wide range of programmable frequency selections and be able to operate on a variety of power supplies. The oscillator must also be immune to external interference, such as noise and vibrations, and be resistant to extreme temperatures. Finally, the oscillator must be able to operate over a wide temperature range and be able to tolerate shock and vibration without delay.

Working Principle of SIT1602AIU1-18E Programmable Frequency Oscillator

The working principle of the SIT1602AIU1-18E Programmable Frequency Oscillator is based on a programmable timer with a microcontroller. The oscillator works by storing a set of programmable registers that can be programmed via a serial interface. These registers control the frequency, duty cycle, and other parameters of the oscillator. The oscillator is also equipped with a quartz crystal that acts as an oscillator and a clock generator. The feed-back loop enables the oscillator to maintain a stable output frequency. The output frequency is determined by the microcontroller. The quartz crystal is powered by an external power supply and the output frequency is determined by the combination of the power supply and the microcontroller.

Conclusion

The SIT1602AIU1-18E Programmable Frequency Oscillator is an excellent choice for a variety of applications that require stable, accurate frequency generation. Its serial interface allows for easy programming of frequencies, and its wide range of programmable frequency selections provides the flexibility desired. It is designed with a quartz crystal as an oscillator and a clock generator, providing a feed-back loop that maintains a stable output frequency. Finally, the oscillator is resistant to noise and vibrations and can operate in a wide range of temperatures.

The specific data is subject to PDF, and the above content is for reference