SIT1602BC-23-25S-40.500000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are devices that provide a periodic signal, such as a sine wave, square wave, or triangle wave. They are used in many different types of electronic equipment, such as radio receivers and transmitters, computers, and audio devices. The primary purpose of an oscillator is to generate a stable signal with a desired frequency and amplitude.

SIT1602BC-23-25S-40.500000E is an oscillator that uses a resonator to generate a stable signal with a specified frequency. The oscillator consists of three main components: a feedback amplifier, a resonator, and a power source. The feedback amplifier amplifies the signal from the resonator, and the power source supplies power to the oscillator. The resonator is the key part of the oscillator and determines the output frequency. It is constructed using a quartz crystal or ceramic material, and has two electrodes that are separated by a dielectric material.

When the oscillator is powered up, the resonator generates an alternating voltage which is amplified by the feedback amplifier. The amplified signal is then sent to the output. The frequency of the output signal is determined by the resonator and is usually set to a certain frequency by adjusting the capacitance across the two electrodes. By altering the voltage levels across the electrodes, the frequency of the output signal can also be changed.

The SIT1602BC-23-25S-40.500000E has a wide range of applications, such as radio communications, frequency synthesisers, audio processing, and motor speed control. It is also used in the field of robotics to control the motion of a robotic arm or other mechanical devices. It can also be used to create precise timing signals, as well as control the output frequencies of electronic devices.

In summary, the SIT1602BC-23-25S-40.500000E is an oscillator with a wide range of applications. It uses a resonator to generate a stable signal with a specified frequency and is primarily used in radio communications, frequency synthesisers and audio processing. It is also used to control robotic devices and create precise timing signals.

The specific data is subject to PDF, and the above content is for reference