SIT1602BC-23-28N-8.192000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic device which can produce regular, periodic, or a repetitive electrical signal. The frequency of the signal can be chosen by properly designing the oscillator or can be tuned in a wide range. The SIT1602BC-23-28N-8.192000E is a type of oscillator that helps in minimizing the space required and can deliver a robust performance.

The SIT1602BC-23-28N-8.192000E is often used in different areas such as a crystal oscillator in video and other broadcasting equipment, in electronic test and measurement instruments, and in RF receivers. It is also widely used in consumer electronic products such as mobile phones, tablets, and other communication devices. This oscillator has the ability to detect various frequency signals and can provide a higher transfer rate for the signals.

The SIT1602BC-23-28N-8.192000E consists of three main components which include the oscillator, the resonator and the voltage regulator. The core of the oscillator is the resonator, which is composed of a quartz crystal and a housing. The quartz crystal is an electrical circuit element that has a characteristic frequency and can oscillate when a voltage is applied to it. The crystal is inserted into the housing of the resonator where it is surrounded by electrodes. The electrodes are connected to the oscillator circuitry and form an electrical feedback loop, allowing the crystal to oscillate at its characteristic frequency.

The vibrating crystal creates a sine wave oscillation, which is amplified and shaped into a square wave form by the oscillator component. The voltage regulator then controls the output voltage, ensuring the oscillator is operating at the correct frequency. This is done by continuously comparing the output of the oscillator to a predefined reference voltage called the set point. When the output voltage rises above the set point, the voltage regulator increases the load on the oscillator, reducing its frequency. Similarly, if the output voltage falls below the set point, the voltage regulator decreases the load on the oscillator, increasing its frequency.

The SIT1602BC-23-28N-8.192000E oscillator is cost effective and can be used in a wide variety of applications, such as embedded systems, GPS, wireless, medical, and automotive applications. Thanks to its low jitter performance, this oscillator can provide reliable timing for system clocks and reference buses, allowing for improved system performance. Additionally, this oscillator is compatible with the higher frequency output which has been adopted by low-power and small form factor devices, providing compatibility for high-speed transfers.

In summary, the SIT1602BC-23-28N-8.192000E oscillator is a cost-effective solution for various applications from embedded systems to automotive. It offers an advantageous solution that minimizes space requirements while delivering robust performance with low jitter. This oscillator has the ability to detect various frequency signals and can provide a higher transfer rate for the signals. Its efficient voltage regulator also ensures that the oscillator is operating at the correct frequency.

The specific data is subject to PDF, and the above content is for reference