SIT1602BC-31-25E-25.000625X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to generate signals which have a periodic shape, such as square waves, sinusoids, and triangular waves. The SIT1602BC-31-25E-25.000625X oscillator is an example of an oscillator which is designed for specific applications such as clock and timing circuits. The SIT1602BC-31-25E-25.000625X oscillator utilizes a CMOS inverter circuit which is designed to produce a square wave output. The oscillator operates at a frequency of 25.000625 MHz and it has a stability of ±25 ppm. This oscillator is suitable for many applications including imaging systems, portable communications, and low-power computing applications.

The working principle of the SIT1602BC-31-25E-25.000625X oscillator is based on the oscillation of the CMOS inverter circuit. The CMOS inverter is composed of two transistors, a PMOS (positive-channel metal-oxide semiconductor) and an NMOS (negative-channel metal-oxide semiconductor). The PMOS transistor has a source-drain voltage of +V which causes it to conduct a current when it is activated. The NMOS transistor has a source-drain voltage of -V which causes it to conduct a current when it is activated. The circuit is designed so that if the PMOS is on and the NMOS is off, the circuit will be in an unstable state and will switch to the next stable state when the NMOS transistor is turned on and the PMOS is turned off.

The CMOS inverter is connected to an output terminal, and when the transistor switches states, it creates a square wave pulse at the output terminal. This pulse is repeated continuously at a frequency determined by the RC network connected to the inverter circuit. The RC network sets the frequency of the oscillation and the capacitor and resistor combination acts as a filter to remove any unwanted noise or artifacts in the signal. The frequency accuracy of the oscillator is determined by the accuracy of the components in the RC network.

The SIT1602BC-31-25E-25.000625X oscillator is designed to be used in applications where a high frequency and accurate time base are required. This type of oscillator is often used in clock and timing circuits, as well as in digital systems where precise timing and frequency control is needed. The oscillator can be used in a variety of systems where an accurate time base is required, such as in electronic watches, computers, portable communications, and imaging systems. It is also used in many low-power computing devices, such as cell phones and portable electronic devices.

The SIT1602BC-31-25E-25.000625X oscillator is a reliable and accurate device which is capable of providing a precise frequency output. The oscillator is easy to use and requires minimal maintenance. It is an excellent choice for applications where a reliable and accurate time base is required. This oscillator is well-suited for use in a variety of applications, ranging from digital systems to low-power computing devices.

The specific data is subject to PDF, and the above content is for reference