SIT1602BC-82-18E-40.500000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that can generate a periodic, oscillating electrical signal without any input from an external source. These signals are of great use in applications ranging from embedded systems and communications to controls and instrumentation. One such oscillator is the SIT1602BC-82-18E-40.500000T, which is a type of voltage-controlled oscillator (VCO).

In its simplest form, VCOs are a type of LC oscillator in which the frequency, or rate, of the output signal is proportional to an input voltage. This makes them useful for applications that require frequency control such as communication systems and signal processing. By adjusting the voltages, the output frequency can be tuned to the desired value. The SIT1602BC-82-18E-40.500000T VCO also provides a very low start-up and switching time and can be used over a wide temperature range.

The SIT1602BC-82-18E-40.500000T VCO has a fixed output frequency of 40.500000 MHz and a tuning voltage range of 0 V to 5 V. The typical rise and fall times of the voltage waveform are less than 200 ns, with a typical phase noise lower than –70 dBc/Hz. This VCO also has an output power of -6 dBm and an effective noise figure of less than –50 dBc/Hz.

The SIT1602BC-82-18E-40.500000T VCO is well suited for wireless communications, particularly in frequencies ranging from cellular, WLAN, to short-range radio band applications. In such systems, VCOs are used to generate the sinusoidal waveform that transceivers use for transmitting and receiving signals. The SIT1602BC-82-18E-40.500000T VCO can be used in this capacity due to its low consumption, fast switching, and wide tuning range. In addition, its small size and low profile make it an ideal choice for space limited applications, such as handheld and portable devices.

VCOs are also used in a variety of control and instrumentation applications, from motor speed control to embedded digital systems. By connecting an analog or digital input to the VCO’s voltage control input, the output frequency can be varied based on the input signal. This capability makes the SIT1602BC-82-18E-40.500000T VCO suitable for use in motor speed control, frequency modulation, and direct digital synthesis applications.

The SIT1602BC-82-18E-40.500000T VCO is an ideal solution for applications that require precise frequency control and wide tuning range. Its low consumption, fast switching, small size and low profile make it suitable for space constrained designs. It is also well suited for wireless communications, control, and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference