SIT1602BC-82-25S-28.636300T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, by definition, are circuits that produce an output waveform that oscillates, or cycles, between two levels. The SIT1602BC-82-25S-28.636300T is a digital-controlled oscillator (DCO). This oscillator is a precision instrument designed for use in high-accuracy instrumentation applications, such as medical, automotive, and aerospace products.

DCOs such as the SIT1602BC-82-25S-28.636300T are designed to produce accurate and stable waveforms over a specified frequency range. It does this by combining an oscillator circuit, an amplifier section, and a frequency divider section. The oscillator circuit may be made up of any type of active or passive components, depending on the type of DCO being used. The amplifier then takes the output of the oscillator and amplifies it to produce the desired output waveform. Finally, the frequency divider section is used to control the oscillation frequency of the output waveform.

The SIT1602BC-82-25S-28.636300T is capable of producing waveforms over a wide range of frequencies, from 0.040 MHz to 56.8 MHz. It is also designed to produce precise and accurate waveforms with very tight tolerance levels. In addition, it has both analog and digital inputs, making it well-suited for use in applications where it is necessary to control the waveform from both digital and analog signals. The SIT1602BC-82-25S-28.636300T also has a built-in idle mode, which allows it to remain in an idle state while still drawing very little current.

The SIT1602BC-82-25S-28.636300T has many applications in instrumentation and other equipment applications due to its precision, accuracy, and low power consumption. It can be used to generate precise frequency references, enable accurate time-division measurements, and produce circular waveforms for PLLs (Phase Locked Loops). Additionally, it can be used to produce periodic waveforms in communications, radar, and motion control circuits.

The SIT1602BC-82-25S-28.636300T DCO combines a low-noise, temperature-insensitive oscillator section with an amplifier and a frequency divider section, to produce a stable, accurate, and low-power output waveform. Its wide range of frequencies and low tolerance levels make it well-suited for applications in instrumentation and other precision-demanding applications. It is also designed for use with both digital and analog signals, making it well-suited for many different types of applications. In addition, its built-in idle mode allows it to remain in a low-power state while still producing accurate outputs, making it an ideal choice for many different types of devices.

The specific data is subject to PDF, and the above content is for reference