SIT1602BC-83-25S-40.000000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SIT1602BC-83-25S-40.000000Y is one of many Oscillators available on the market. An Oscillator is a type of electronic component which is designed to maintain a certain waveform for a sustained period of time and repeat it for a given frequency. Oscillators are used in many electronic devices and systems to provide a timebase for an operation, as well as to control the frequency or phase of other signals.

The SIT1602BC-83-25S-40.000000Y Oscillator is available in three versions including the standard, VCO, and PWM. The standard version has an adjustable frequency range between 40 kHz and 50 MHz and a frequency accuracy of ±20 ppm. The VCO version has a frequency range between 10kHz and 50MHz with a frequency accuracy of ±2.5ppm and the PWM version has a frequency range between 10kHz to 50MHz with a frequency accuracy of ± 0.05%.

The major application field of the SIT1602BC-83-25S-40.000000Y Oscillator is in the field of embedded electronics and microcontrollers. It can be used to provide an oscillation frequency for the processor as well as to control the timing and frequency of other components. Additionally, it can be used in communication systems such as cell phone base stations, wireless LANs, GPS systems and RFID technology. In these applications, the oscillator is used to generate clock or data signals.

The working principle behind the SIT1602BC-83-25S-40.000000Y Oscillator is based on the negative differential resistance (NDR) of certain semiconductor materials or devices. These devices are connected to an LC circuit, which is a circuit that consists of an inductor and a capacitor connected in series. Depending on the design, the LC circuit may include additional components such as resistors or transistors. The oscillator works by constantly charging and discharging the capacitor, which in turn changes the voltage of the inductor. The NDR device is then used to amplify this voltage, generating an alternating voltage waveform that repeats at a given frequency. This frequency can then be controlled by changing the components of the LC circuit.

The specific data is subject to PDF, and the above content is for reference