SIT1602BC-83-33N-33.333330T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscilloators (otherwise known as signal generating circuits) are typically used to create electrical signals with a specific frequency and amplitude or time period. These signals are later used to control external devices such as motors or transmitters, or for data communication. The SIT1602BC-83-33N-33.333330T is a popular oscillator for many applications.

The SIT1602BC-83-33N-33.333330T is a CMOS programmable frequency oscillator with an low operating current. It features an operating frequency range from 15 to 200kHz and an operating voltage of 3.3V. It has a high stability frequency accuracy with a frequency error of 0.5 Hz over a range of temperatures. It also includes a temperature compensation feature with an operating temperature range from -20°C to 80°C. The oscillator also includes both a CMOS output and a TTL output.

One of the most common applications for the SIT1602BC-83-33N-33.333330T is in motion control systems. As the oscillator is capable of generating different frequency signals, it can be used as a frequency source for motor control signals. For example, in a DC motor control system, the oscillator can be used to generate a signal with a specific frequency, such as a pulse-width modulation (PWM) signal. This signal can then be used to control the speed and torque of the motor.

Another common application of the SIT1602BC-83-33N-33.333330T is in communication systems. As the oscillator can generate a continuous signal in a specific frequency range, it can be used to generate carrier signals for data transmission. This can then be used to modulate data onto the carrier signal for data transmission. It can also be used to generate timing signals for controlling the transmission of data.

The working principle of the SIT1602BC-83-33N-33.333330T is based on positive feedback. The oscillator circuit consists of an amplifier and an oscillation network. The oscillation network consists of two resistors, a capacitor, and an input voltage. This network acts as a filter to convert the A.C input signal to a D.C signal. The output of the network is then fed back to the amplifier, which is used to boost and amplify the input voltage. The amplified signal is then sent back through the oscillation network and thus creates a positive feedback loop. This feedback loop causes the voltage at the input of the amplifier to oscillate. The frequency of the oscillation is determined by the frequency response of the oscillator circuit.

In summary, the SIT1602BC-83-33N-33.333330T is a CMOS programmable frequency oscillator with a very low operating current and stability frequency accuracy. It is commonly used in motion control systems and communication systems, and its working principle is based on positive feedback. The oscillator is a great choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference