SIT1602BI-22-33E-24.000000G Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical, mechanical or chemical devices that allow for the regular and repeated change between two states. The SIT1602BI-22-33E-24.000000G oscillator is a frequency-control product operating at a frequency of 24MHz. It is a high performance voltage-controlled crystal oscillator that utilizes a specialized analog to digital converter to help adjust the frequency. This oscillator belongs to the family of voltage-controlled oscillators (VCOs).

Applications for SIT1602BI-22-33E-24.000000G oscillator vary in industry. Some typical applications include use in radio frequency communication systems, GPS receivers, radar systems, avionics and cellular transceivers. Oscillators are also used in laboratory test equipment that requires signal generators. In addition, they are used in digital signal processors, modulation and demodulation systems, hand-held instrumentation and frequency-shift keying systems.

The working principle of the SIT1602BI-22-33E-24.000000G oscillator is as follows. An analog voltage signal is passed through the VCO typically across an installed varactor diode. This analog voltage signal is then converted to a digital signal, which is then compared against the desired input frequency. If the digital signal corresponds with the desired input frequency an output signal is generated which is the oscillator’s operating frequency.

At the core of the SIT1602BI-22-33E-24.000000G oscillator is a phase-locked loop (PLL) integrated circuit and a frequency multiplier. The PLL enables frequency-correction of the input signal and responds to variations in the applied voltage to trim the frequency of the output signal. The frequency multiplier increases the frequency of the signal multifold through the non-linear application of its electrical parameters.

In general, a voltage-controlled oscillator (VCO) is composed of several components. These components include an amplifier, a resistive network, a parallel capacitor, and an inductor. These components work together to generate an oscillator signal that can be adjusted and controlled by external voltages. In the case of the SIT1602BI-22-33E-24.000000G oscillator, an analog-to-digital converter is used to adjust the frequency.

The SIT1602BI-22-33E-24.000000G oscillator is a dependable choice when it comes to offering accurate and precise frequency control for many industrial applications. Its solid construction and comprehensive feature set make it an ideal choice for various applications. This oscillator proves to be an effective solution for low power and space-restricted systems with its low noise and low jitter performance.

The specific data is subject to PDF, and the above content is for reference