SIT8008AI-72-25E-25.000000G

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	4mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.2mA
Operating Temperature:	-40°C ~ 85°C
Series:	SiT8008
Frequency Stability:	±25ppm
Voltage - Supply:	2.5V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	25MHz
Type:	MEMS (Silicon)
Part Status:	Not For New Designs
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic circuits that generate a periodic, oscillating electronic signal, often a sine wave or a square wave. They are widely used in electronic systems to provide periodic electronic signals or to generate time base references. One of the most common oscillators is SIT8008AI-72-25E-25.000000G, a type of quartz crystal oscillator that produces a frequency of 25MHz with exceptional stability. This article will provide an overview of the application field and working principle of SIT8008AI-72-25E-25.000000G oscillator.

Application Field

SIT8008AI-72-25E-25.000000G oscillator has a wide range of applications. For example, it can be used to generate a precision frequency or time interval reference in communication systems such as cell phones and Wi-Fi networks. It is also widely used in satellites and other navigation systems to provide precise timing information for positioning and synchronization. Moreover, it is used as the reference clock in medical imaging systems and laboraroty test equipment. It is also used in radio and television broadcasting systems, and in industrial robots.

Working Principle

The frequency generated by SIT8008AI-72-25E-25.000000G oscillator is based on the vibrational properties of quartz. Inside the oscillator is a quartz crystal disk that is carefully cut and shaped into a four-layer, parallel plate structure. On each plate is a coating of electrodes. To begin the process, the quartz crystal disk is placed between two electrodes, and an alternating electric current is applied to the electrodes. This causes the quartz crystal to vibrate and produce a sine wave or a square wave signal with a constant and precise frequency. The frequency of the SIT8008AI-72-25E-25.000000G oscillator is determined by the thickness and size of the quartz crystal. The thicker the crystal, the lower the frequency, and the thinner the crystal, the higher the frequency. Moreover, the frequency of the oscillations can be controlled by changing the voltage applied to the electrodes. This allows for very precise control over the frequency of the oscillator.

Conclusion

SIT8008AI-72-25E-25.000000G oscillator is a type of quartz crystal oscillator that produces a frequency of 25MHz with exceptional stability. Thanks to its accuracy and reliability, the oscillator has found applications in a wide range of systems, including cell phones, Wi-Fi networks, medical imaging systems, laboratory test equipment, and industrial robots. Its frequency is determined by the size and thickness of the quartz crystal, and can also be regulated by changing the voltage applied to its electrodes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description