SIT8208AI-3F-28E-62.500000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a class of electronic components that produce continuous electrical waves. In principle, they work by sustaining a feedback loop between an input signal and an output signal. By properly controlling the parameters of the feedback loop, the frequency and amplitude of the wave can be modified. A well-designed oscillator will produce an alternating electrical signal with minimal distortion. The SIT8208AI-3F-28E-62.500000Y is an example of an oscillator. It is a high precision, low cost solution for applications requiring accurate clock signals. It features a low phase noise VCO, programmable frequency range, ±20ppm frequency accuracy, and a wide voltage range. Additionally, it offers an integrated LDO and phase detector, simplifying system design and reducing component count. The SIT8208AI-3F-28E-62.500000Y can be used in applications such as frequency synthesizers, clock generators, reference oscillators, RF systems, and telecommunications. It can be used to generate a range of frequencies from 62.5kHz to 50MHz. The working principle of the SIT8208AI-3F-28E-62.500000Y is based on a Voltage Controlled Oscillator (VCO). The VCO is a type of oscillator circuit that is controlled by an input voltage. The VCO is composed of two core elements: an amplifier and a frequency controlling device, such as a varactor diode. The input voltage is applied to the VCO, and this controls the frequency of oscillation. The SIT8208AI-3F-28E-62.500000Y utilizes a phase locked loop (PLL) circuit to control the frequency and amplitude of the output waveform. The PLL is composed of four basic elements: a voltage controlled oscillator (VCO), a phase detector, a low pass filter (LPF), and a periodic frequency divider. The PLL collects a reference signal and uses it as a basis to compare with the signal produced by the VCO. When the two signals are in phase, the output of the phase detector is at its maximum. This is used to adjust the voltage of the VCO in order to maintain the same signal frequency. The SIT8208AI-3F-28E-62.500000Y also includes a digital frequency divider for reducing the output frequency range. This divider is a 4-bit divide-by-16 counter that allows the user to select the desired frequency output from 62.5kHz to 50MHz. In addition, the oscillator incorporates a low dropout regulator (LDO) to reduce voltage noise levels and improve system performance. The LDO can provide a constant output voltage for improved system accuracy. In summary, the SIT8208AI-3F-28E-62.500000Y is a high precision, low cost oscillator solution designed for various applications such as frequency synthesizers, clock generators, reference oscillators, RF systems, and telecommunications. It features a VCO for controlling the frequency output, a PLL for controlling the waveform, and a digital frequency divider for narrowing the output frequency range. Furthermore, the LDO provides a constant output voltage for improved system accuracy.

The specific data is subject to PDF, and the above content is for reference