SIT8008BI-23-33E-9.984000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits capable of producing oscillating signals at frequencies typically ranging from a fraction of a Hertz (Hz) to tens of megahertz (MHz). In recent years, there has been an increased demand for oscillators that can operate under a wider range of environmental conditions. One such oscillator is the SIT8008BI-23-33E-9.984000D, a dual low-power crystal oscillator designed for low-power applications.

SIT8008BI-23-33E-9.984000D is a high-quality and highly reliable circuit, capable of providing up to 1MHz in frequency stability at the same environmental conditions. It consists of two independent oscillators, each with their own low-power crystal path and associated circuitry. The first oscillator is designed to provide a frequency directly from a crystal, while the second oscillator is designed to be the buffer or \'bus oscillator\' and provides a frequency of 50kHz through a 40kHz crystal. Both oscillators share a common oscillator circuit and share a single power supply voltage.

The two oscillators are tightly matched, utilizing an on-board phase-locked-loop (PLL) to control loop parameters. The PLL provides a good overall frequency and phase accuracy, with a maximum frequency stability of ±0.1ppm over a temperature range of - 40°C to +85°C. The SIT8008BI-23-33E-9.984000D is designed to be used in a wide variety of applications, including telecoms, consumer electronics, and automotive. It is also suitable for use as frequency reference applications and embedded systems.

The operating principle of the SIT8008BI-23-33E-9.984000D is based on a combination of the frequency stability of a high-quality crystal, as well as the PLL-based frequency control. The oscillator provides a low power start-up time (less than 0.5s) and a low current consumption (<3 mA). The circuit also features an ultra-low-noise crystal, providing a very good signal-to-noise ratio of up to -100 dBm.

The SIT8008BI-23-33E-9.984000D oscillator is a versatile and reliable circuit, capable of meeting the requirements of a wide range of applications. Its robust design and reliable performance make it an ideal choice for low-power applications, as well as applications where frequency stability is of the utmost importance.

The specific data is subject to PDF, and the above content is for reference