SIT9002AI-23H25DD

Frequency Stability:	±50ppm
Height:	0.031" (0.79mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	77mA
Spread Spectrum Bandwidth:	±0.50%, Center Spread
Operating Temperature:	-40°C ~ 85°C
Frequency Stability (Total):	--
Series:	SiT9002
Voltage - Supply:	2.5V
Output:	LVDS
Function:	--
Available Frequency Range:	1MHz ~ 220MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable oscillators are electronic components or devices used to generate repetitive electronic signals or waves in a wide range of frequencies and other specific requirements. They are used in a variety of diverse applications and rely on a variety of technologies to achieve their results. Depending on the type of programmable oscillator device, the general principle of operation for these devices is basically the same.The SIT9002AI-23H25DD is a specific type of programmable oscillator which employs a range of digital technologies to generate sine, square, and triangular waves in frequencies from 1 Hz to 25 MHz. This oscillator is ideal for signal generation in devices with special power requirements, such as in drones and robots.The working principle of the SIT9002AI-23H25DD is similar to that of other programmable oscillators. This device uses the same basic components and principles of operation, but the technology employed to achieve it is different.At its most basic, the SIT9002AI-23H25DD consists of a low power voltage regulator, voltage controlled oscillator, frequency-to-voltage converter, voltage controlled resistors, and a buffer. Each of these components works together to produce the necessary output signal, in this case a sine, square, or triangular wave at the desired frequency.The voltage regulator is responsible for providing a stable and constant power supply to the programmable oscillator. Typically, the maximum input voltage is 9V DC, however, there is a wide range of adjustable output voltage that this regulator is capable of providing. The output from this power regulator is then fed into the voltage controlled oscillator.This oscillator uses a voltage controlled resistor to adjust the frequency of the signal being generated. The voltage controlled resistor is automatically adjusted depending on the input signal, thus allowing for a wide range of frequencies to be created.The output of the oscillator is then fed into a frequency-to-voltage converter which is responsible for converting the output frequency into a voltage signal. This voltage is then fed into the voltage controlled resistors once again which modifies the signal. The output from the resistors is finally fed into a buffer which amplifies the signal and provides the desired output.As with other programmable oscillators, the SIT9002AI-23H25DD can be used in a number of different applications. These include signal generation for industry, medical, and military usage, as well as being a commonly used in radio and television communication systems.The SIT9002AI-23H25DD is a highly reliable, accurate, and cost-effective programmable oscillator. Its simplicity in operation and its wide range of frequencies and other features make it an ideal programmable oscillator for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description