SIT9120AC-2D3-33S166.666600Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are essential for many electronics applications. They are a type of electronic circuit that can produce a steady periodic waveform, typically at an adjustable frequency or rate. The SIT9120AC-2D3-33S166.666600Y is one such oscillator that can be used in a wide range of applications. This article will look at the different applications of this oscillator, as well as its working principle.

Application Field of SIT9120AC-2D3-33S166.666600Y Oscillator

The SIT9120AC-2D3-33S166.666600Y oscillator has a wide range of applications. It is mainly used in microcontroller-based applications, such as controlling the output frequency of brushless DC motors, controlling the speed and position of AC servos, and for pulse position modulation (PPM) and pulse width modulation (PWM) applications. The oscillator can also be used in radio communication applications, such as generating the carrier wave and the modulated signals for transmission. It can be used in power amplifiers, switches, and other digital logic circuits. It can also be used in data conversion applications such as digital-to-analog converters (DACs) and analog-to-digital converters (ADCs).

The SIT9120AC-2D3-33S166.666600Y oscillator is also suitable for medical applications, such as dialysis machines and other medical equipment. It can be used in digital audio applications, such as digital signal processing (DSP) and sound synthesis. It can also be used in power control circuits, such as motor controllers.

Working Principle of SIT9120AC-2D3-33S166.666600Y Oscillator

The SIT9120AC-2D3-33S166.666600Y oscillator consists of a transistor, a feedback capacitor, a bias resistor, and an output transformer. The oscillator is basically a relaxation oscillator, which is a type of oscillator circuit that operates by cycling between an On state and an Off state. The transistor is connected in a self-biased Darlington configuration, with a feedback capacitor connected across the base and the emitter. The capacitor stores energy during the On state and then releases it slowly during the Off state. The positive feedback from the capacitor causes the transistor to switch from the On state to the Off state, and then back to the On state again at regular intervals. This cycle produces an oscillating signal at the output of the oscillator.

The output frequency of the oscillator is determined by the values of the capacitor and the bias resistor. The bias resistor sets the amount of current that flows through the transistor, and the feedback capacitor sets the rate at which the charge acquired by the capacitor is released. When these two components are properly matched, the oscillator is able to produce a signal with a stable, fixed frequency.

The SIT9120AC-2D3-33S166.666600Y oscillator is a low power, low frequency oscillator. It has a minimum supply voltage of 2.5V and a maximum output frequency of about 166.666600 kHz. It is available in two versions, a surface mount version and a through-hole version, making it suitable for a wide range of applications.

Conclusion

The SIT9120AC-2D3-33S166.666600Y is a versatile oscillator that can be used in a wide range of applications. It is a low power, low frequency oscillator that can produce a steady, periodic waveform at an adjustable frequency. The oscillator uses a relaxation oscillator circuit to produce a signal with a stable, fixed frequency. The output frequency can be adjusted by changing the values of the feedback capacitor and the bias resistor. The SIT9120AC-2D3-33S166.666600Y oscillator is available in two versions, a surface mount version and a through-hole version.

The specific data is subject to PDF, and the above content is for reference