SIT9002AI-28H33DK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are electronic components used to generate a periodic signal, or alternately, used to process a periodic signal input. The programmable oscillator takes advantage of programmable logic devices to generate more flexibility and simplicity in their application and distinctive design. The SIT9002AI-28H33DK is one such programmable oscillator.

The SIT9002AI-28H33DK has two channels which can be programmed individually for different frequency, amplitude, and duty cycle settings. The first channel has a split frequency mode in order for the generator to drive vibrating motors, stepper motors, or other non-linear loads. The second channel can be used to process a signal from an input source, like a microphone or piezo element. This signal can then be used to generate specific audible frequencies or tones. The SIT9002AI-28H33DK also has an adjustable output power level and a built-in clock for timing sensitive applications.

The programming is done through an onboard oscillator and a microcontroller. The oscillator provides an input signal to the controller which then processes the signal and outputs the programmed parts of the waveform. The output of the controller is then amplified and directed to the output terminals. This setup allows for a considerable range of use, covering selection of various waveforms, modulation of the signal and dynamic output control. With the right settings in place, the SIT9002AI-28H33DK can be used to create a variety of audible and non-audible signals, depending on the application.

The SIT9002AI-28H33DK is mainly used in industrial automation and robotics as well as in communications systems and audio applications. It is also frequently used in medical devices and laboratory equipment. In communications systems, the SIT9002AI-28H33DK is used for pulse or frequency modulation of a signal, so that it can reach its intended destination. In robotics, the SIT9002AI-28H33DK can be used for accurate timing of robotic movements or for precise control of motor speeds. In medical applications, the SIT9002AI-28H33DK can be used to generate audible signals for providing feedback to the patient or for providing signals to medical sensors. Finally, in audio applications, the SIT9002AI-28H33DK can be used to generate specific waveforms, as well as to control and modulate the audio signal.

The working principle of the SIT9002AI-28H33DK is quite simple and intuitive. The oscillator provides an input signal to the controller which processes the signal and controls the output depending on the instructions issued. These instructions come from programming the microcontroller, which then transfers the instructions to the oscillator. The controller then outputs the programmed parts of the waveform, amplifies the signal and sends it to the output terminals.

The SIT9002AI-28H33DK programmable oscillator offers a lot of flexibility, making it a great choice for a wide range of applications. It offers precise control, high accuracy, and reliable performance and provides a simple and intuitive method of controlling various frequency and amplitude parameters. With the right settings, the SIT9002AI-28H33DK can create a variety of audible and non-audible signals, and can be used in a range of industrial, communications, and audio applications.

The specific data is subject to PDF, and the above content is for reference