SIT9003AC-3-18ED

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are highly versatile hardware components. They can be used in a variety of applications, from generating signals for timing control and communications to providing frequency and phase control for systems that require precision accuracy. The SIT9003AC-3-18ED is a programmable oscillator that is designed to meet the needs of varied applications: from aerospace, medical, telecom and industrial to consumer electronics.

It is an oscillator that uses a silicon oscillator chip which can be used in a variety of applications ranging from communications and data transmission, to timing control and signal conversion. The oscillator generates sine waves with excellent precision at various frequencies and is also capable of providing a variety of waveforms with tight control on the rise/fall time and signal shape.

The SIT9003AC-3-18ED oscillator IC provides a wide range of frequency modes and has a power supply that ranges from -10V to +15V with an accuracy of 0.005%. It has an output voltage accuracy of 0.2%, as well as a temperature coefficient of -10 to +45ppm/°C at a temperature range of -40 to +85°C. It also has a range operating voltage of 0.5V to 5.5V and a high long-term stability.

The SIT9003AC-3-18ED oscillator IC is designed to be used in applications that require precise frequency control and high accuracy. Its programmable frequency range can be adjusted from 800kHz to 80MHz. It also features an adjustable rise/fall time, as well as a power-down mode. The IC is capable of providing excellent accuracy and jitter performance, allowing it to be used in anything from low-power radio applications to high-speed data communications.

The working principle of the SIT9003AC-3-18ED oscillator consists of two components: the oscillator chip and a voltage-controlled oscillator (VCO) circuit. The oscillator chip is a silicon-based component, which makes use of a combination of capacitors and resistors to create an oscillation. When the appropriate voltage is applied to the chip, it creates a periodic signal. The frequency of this signal is then determined by the frequency of the external circuit components and the VCO circuit.

The VCO circuit is used to control and adjust the frequency of the oscillator circuit. The VCO circuit is comprised of a voltage-controlled voltage source, an amplifier and a filter circuit. The voltage-controlled voltage source creates the voltage that is used to control the frequency of the oscillator. The amplifier is used to amplify the amplitude of the signal, and the filter circuit is used to filter out any unwanted noise.

Once the voltage is applied to the oscillator chip, the frequency saturation will occur. This is when the output of the oscillator approaches the stable and fixed frequency of the oscillator. The frequency control range of the SIT9003AC-3-18ED is from 800kHz to 80MHz. The output frequency is accurately controlled and is stable even when the power supply is changed.

The SIT9003AC-3-18ED programmable oscillator provides precise frequency control and high accuracy for applications where timing and reliability are critical. Its wide range of frequency modes, power-down mode, adjustable rise/fall time, low power consumption and long-term stability make it an ideal choice for a variety of applications. This makes it an ideal choice for a wide range of applications, from communication, medical and telecom to industrial, aerospace and consumer electronics.

The specific data is subject to PDF, and the above content is for reference