SIT9005ACA1H-18NF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators have been widely used in various applications and are a key component of many types of electrical devices. SIT9005ACA1H-18NF is one of them and it is widely used in various applications as well.

The SIT9005ACA1H-18NF is an eight pin, surface mount, programmable oscillator that combines low power consumption and high stability into an affordable package. The unit is specifically designed for use in a variety of applications, including computers, telecommunications, avionics, industrial instrumentation, and medical imaging.

The SIT9005ACA1H-18NF is programmed using a 5-wire serial protocol. It can be programmed to provide a wide variety of timing functions and output frequencies, as well as stability, accuracy and phase-noise performance. The programming protocol is supported by an on-chip state machine and built-in non-volatile memory, which means that the device’s desired parameters can be easily programmed directly via the serial port or by a remote device such as a laptop or PDA.

The SIT9005ACA1H-18NF works as follows. It has a master oscillator, which is programmed to the desired frequency and output level. If a different frequency is required, an alternative frequency is loaded into the chip’s non-volatile memory. Then, the alternative frequency will be used during operation. Additionally, the chip includes an on-chip temperature sensor which can be used to compensate for temperature variations in the environment.

The SIT9005ACA1H-18NF can function as either a crystal oscillator or a voltage-controlled oscillator, depending on the application. When used as a crystal oscillator, the master oscillator is locked to the crystal and the alternative frequency is derived from the crystal frequency. Additionally, the device also has a built-in amplifier and filter to produce a clean, stable output.

When used as a voltage-controlled oscillator, the master oscillator is driven by an external voltage-controlled oscillator (VCXO). In this configuration, the device can be programmed to operate over a wide range of frequencies, allowing it to be used in a wider variety of applications.

The SIT9005ACA1H-18NF is a highly reliable and cost-effective device that can be used in a variety of applications. It is designed to provide a wide range of frequencies, output levels, and stability, and offers superior performance for low power consumption in many applications. In addition, its modular construction makes it highly reconfigurable for custom solutions or future upgrades.

The specific data is subject to PDF, and the above content is for reference