SIT9005ACL1H-XXEP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are devices that generate precise and repeatable waveforms at frequencies from a few kilohertz to several gigahertz. This type of component, which can be applied to a wide range of applications, is essential for systems requiring precise time base for clock and timing applications. The SIT9005ACL1H-XXEP is an application field of oscillator which combines the high reliability and long-term stability of a quartz crystal resonator in an industry-standard, low-jitter plastic surface-mount package. The application field of SIT9005ACL1H-XXEP includes energy management and control, telecom, automotive, and embedded systems.

The SIT9005ACL1H-XXEP is a programmable oscillator. This device has a low-jitter VCO design that allows precise frequency adjustment and precise frequency tuning. The die of this oscillator is a multi-frequency IC fabricated in a 0.4 mm BGA package. It typically has an output frequency range from 1 MHz to 110 MHz, but can range from 60 kHz to 1 GHz depending on the specifications. The device operates from a single supply voltage of +3.3V. The oscillator can be programmed with a variety of frequency dividers, including standard CMOS dividers, integer dividers, and low-jitter dividers. The output jitter is typically less than 10ps.

The main working principle of the SIT9005ACL1H-XXEP is based on the use of a quartz crystal-controlled timing circuit, which is capable of providing a precise and stable clock frequency. The frequency of the device is divided by a programmable frequency divider. The output frequency is adjusted by varying the duty cycle of the divider circuits, or by selecting a different reference frequency. The frequency division is achieved by using a combination of on-chip inverters, flip-flops, registers, counters, and latches.

The output of the oscillator is further buffered by a divide-by-N circuit and a low-noise amplifier. The amplifier is designed to minimize phase noise and maintain the highest accuracy of output frequencies. The output of the phase detector is then used to control the voltage-controlled oscillator, which is responsible for generating the precise clock frequency that is output by the device. The output is then filtered by a low-pass filter circuit to ensure a low-jitter signal is produced.

The SIT9005ACL1H-XXEP can be programmed via the I2C or SPI interfaces. The programming interface allows the user to control the frequency and accuracy of the output. This allows for customization of the device for specific applications. The configuration data is stored in the device’s internal non-volatile memory to ensure that the settings remain unchanged if the power is lost or the device is reprogrammed.

The SIT9005ACL1H-XXEP is a high-performance programmable oscillator that can be used for a wide range of applications. It offers a high level of accuracy and stability, and features a low jitter output. The device is available in an industry-standard, low-jitter plastic surface-mount package and can be programmed via I2C or SPI interfaces. This makes the SIT9005ACL1H-XXEP an ideal choice for energy management and control, telecom, automotive, and embedded systems.

The specific data is subject to PDF, and the above content is for reference