SIT9120AC-2D1-25E133.333000X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are the key components of any electronic system. The SIT9120AC-2D1-25E133.333000X is a crystal oscillator, which can convert a sinusoidal input voltage into a sinusoidal output voltage. It is a two-stage oscillator and consists of two stages: a voltage controlled oscillator (VCO) and a phase-locked loop (PLL). The first stage, the VCO, uses voltage input to control the oscillation frequency. The PLL then uses the VCO output to control the oscillation frequency. The SIT9120AC-2D1-25E133.333000X is able to generate frequencies over a wide range, from 100 Hz to 25 MHz.

The SIT9120AC-2D1-25E133.333000X has a variety of applications in the electronics industry. It can be used to generate frequencies for radio wave receivers. It can also be used for clock and timing signal applications, such as signal transmission in telecommunications systems. In addition, it is used in consumer electronics to generate clock signals for processors. Finally, it can be used to generate sine waves in audio amplifiers and other audio equipment.

The working principle of the SIT9120AC-2D1-25E133.333000X is quite simple. It consists of two main parts: the VCO and the PLL. The VCO receives an input voltage from the PLL. This input voltage is used to control the oscillation frequency of the VCO. The VCO then produces a sinusoidal output voltage. The PLL receives this output voltage and adjusts its own voltage based on it. This adjusts the frequency of the VCO, thereby controlling the frequency of the oscillator.

In conclusion, the SIT9120AC-2D1-25E133.333000X is a two-stage crystal oscillator that is able to generate frequencies ranging from 100 Hz to 25 MHz. It can be used in a variety of applications in the electronics industry, such as radio wave receivers, clock/timing signals, consumer electronics, and audio amplifiers. Its working principle is based on the VCO and PLL, in which the PLL adjusts its own voltage based on the output voltage of the VCO.

The specific data is subject to PDF, and the above content is for reference