SKY13415-485LF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are components used to switch real signals at radio frequency (RF) applications, they are used to route, switch, and/or multiplex RF signals between applications and devices. The SKY13415-485LF is a high power RF switch designed specifically for cellular applications that use bands up to 6 GHz. This switch offers a high power handling capability, low insertion loss, good linearity and high switch isolation.

Application Field of SKY13415-485LF

The SKY13415-485LF is designed for applications that use cellular frequencies up to 6 GHz. It can be used in variousmobile and cellular base stations, including 4G/LTE and 5G. It was designed to be used in high powertransmit/receive antenna systems, where a small number of RF signals need to be routed between multipleantennas and application components. This switch is also suited for point-to-point radio systems and other mid/high power base station applications.

Working Principle of SKY13415-485LF

The SKY13415-485LF is an analog transistor switch with multiple outputs. It is controlled by a digital input signal that operates as a switch and can be programmed to operate independent of the control input. This switch is comprised of two power transistors that are arranged in parallel with an input signal, allowing two signals to be routed to two outputs on the same chip. The control logic of the switch is implemented using a switching matrix design and can handle up to 6 GHz of frequency.

The manner in which the switch is operated is determined by the control logic of the switch. The different control inputs of the SKY13415-485LF are used to enable and disable the different transistors in the switch. When the switch is enabled, the relevant transistors will be turned on and off as per the control logic. The digital logic will also be used to select which of the two outputs will be used to route the RF signal. Once the switch is enabled, it will be able to route the RF signal to the desired output.

The switch can also be configured to work in a number of different modes, including a single mode where one input is multiplexed to two different outputs. Additionally, the device can also be programmed to operate in a dual mode, where two input signals can be routed to both outputs on the same chip.

The main advantage of the SKY13415-485LF is its ability to switch high power RF signals between applications and devices with a high level of linearity and isolation. This makes it ideally suited for applications that require high power and high linearity levels. Additionally, its low insertion loss and low output noise makes it suitable for cellular base station and antennas systems as well.

The specific data is subject to PDF, and the above content is for reference