SKY13522-644LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are signal routing components capable of isolating, attenuating, and transferring a wide range of frequency signals. Therefore, these switches are integral building blocks in a variety of electronic systems, such as radio or television receivers. They are also used in spectrum analyzers, antenna tuning systems, and signal combiners. The SKY13522-644LF is a perfect example of an RF switch that provides premium performance and flexibility.

The SKY13522-644LF is a low power dynamic RF switch which offers an input port (which can receive signals through a 50 ohm matched termination), two output ports and a control port. It is primarily used to route signals from the input port to one of two output ports, depending on the logic state of the control port. It is capable of handling a wide range of frequencies from DC to 6 GHz, with a power handling capability of up to 10W in the upper frequency bands. It also has an excellent return loss of greater than 10 dB across all frequencies, and a high isolation of greater than 25 dB.

The design of the SKY13522-644LF consists of a single common field-effect transistor FET which acts as a switch between the input and output ports of the device. It is designed to be used in applications where a high input impedance, low harmonic distortion, and low insertion loss are required.

The operating principle of the SKY13522-644LF RF switch is based on a direct DC-to-RF switching mechanism. When the control port is in the low logic state, the FET is open-circuited, allowing the signal to pass through to the appropriate output port. When the control port is in the high logic state, the FET is closed-circuited, blocking the signal from passing through.

The SKY13522-644LF is a versatile RF switch which can be employed in multiple communication and measurement applications. For example, it can be used in the development of software-defined radio (SDR) systems and the design of interference cancellation solutions. It can also be used for antenna diversity, radar signal switching, self-interference cancellation, and general test and measurement applications.

The main advantages of the SKY13522-644LF RF switch are its wide frequency range of DC to 6 GHz, high power capability, excellent return loss, and high isolation. It also has low insertion loss, low voltage and current requirements, and excellent linearity. It is also easy to integrate since it comes in a space-saving surface mount package.

In summary, the SKY13522-644LF is a highly versatile RF switch capable of handling a wide range of frequency signals. It has excellent return loss and high isolation, making it ideal for SDR development, antenna diversity, radar signal switching, and general test and measurement applications. Its low power and voltage requirements, in addition to its small form factor, make it appealing for system designers.

The specific data is subject to PDF, and the above content is for reference