Allicdata Part #: | 570-1095-ND |
Manufacturer Part#: |
SL08 33001 |
Price: | $ 0.40 |
Product Category: | Circuit Protection |
Manufacturer: | Ametherm |
Short Description: | ICL 33 OHM 20% 1.3A 8MM |
More Detail: | Inrush Current Limiter 33 Ohms ±20% 1.3A 0.315" (8... |
DataSheet: | SL08 33001 Datasheet/PDF |
Quantity: | 1513 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 0.35910 |
5 +: | $ 0.34776 |
10 +: | $ 0.33768 |
50 +: | $ 0.28388 |
100 +: | $ 0.23562 |
250 +: | $ 0.21420 |
500 +: | $ 0.18207 |
1000 +: | $ 0.16065 |
5000 +: | $ 0.14459 |
Series: | miniAMP |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
R @ 25°C: | 33 Ohms |
Tolerance: | ±20% |
Current - Steady State Max: | 1.3A |
R @ Current: | 750 mOhms |
Diameter: | 0.315" (8mm) |
Lead Spacing: | 0.200" (5.08mm) |
Approvals: | UL |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inrush Current Limiters (ICLs) are electronic devices used to limit the inrush of current to a circuit or system, and the SL08 33001 is no exception. This ICL is specifically designed to limit fault currents and transients to levels below the melt threshold of receivers or loads, and its long operating range makes it suitable for any system. This article will discuss the application field and working principle of the SL08 33001.
With its ability to sense current, the SL08 33001 can be used in a number of different applications, including industrial control systems, power supplies, automotive systems, communication systems, and power distribution networks. Its robust construction and low operating cost makes it well-suited for use in a wide range of industries. The SL08 33001 is also suitable for use in harsh environments such as wet and dusty locations, as well as with temperatures that may exceed standard limits.
In order to understand the working principle of the SL08 33001, it is important to understand what an inrush current is. An inrush current is an instantaneous increase in current that occurs when an electric device is first energized. Inrush currents can cause significant damage to equipment, components, and systems, and they can also cause detrimental damage to electric motors, transformers, and other components, if the inrush current is too high. By incorporating the SL08 33001 into a system, the inrush current is restricted, preventing damage to equipment.
The SL08 33001 works by incorporating an internal sensing element, which monitors the system’s current. It is designed to detect inrush currents as they occur, and limit their peak value. To accomplish this, the ICL utilizes a silicon-controlled diode and a protective resistor in series. When an inrush current is detected, the diode and resistor work together to limit the current to a level below the melting point of the load. The resistor enables the diode to utilize a “soft-start” feature, which limits the inrush current to a preset level. This ensures that the load is protected from the higher inrush current that can occur.
The SL08 33001 is designed for use in medium and high power applications, and is rated for currents up to 250 A. Its tight tolerance switching ensures reliable operation in heavy duty applications and its maximum operating temperature is rated at up to 75°C. It also has the ability to sense both AC and DC current, making it suitable for use in a variety of different applications. Additionally, its long customer operating time and low operating cost make it an attractive choice when compared to other solutions.
In summary, the SL08 33001 is an Inrush Current Limiter (ICL) designed to protect equipment from the detrimental effects of inrush currents. Its heavy duty construction and long operating range make it suitable for use in a variety of different applications, including industrial control systems, power supplies, automotive systems, communication systems, and power distribution networks. By combining an internal sensing element, silicon-controlled diode, and protective resistor, the SL08 33001 is able to sense inrush currents as they occur, and limit their peak value. Its tight tolerance switching and ability to sense both AC and DC current make it an incredibly reliable ICL, while its low operating cost makes it a cost-effective solution. In the end, the SL08 33001 clearly demonstrates the capability of using an ICL to safely and reliably limit inrush current.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SL08 12101 | Ametherm | 0.4 $ | 8579 | ICL 120 OHM 25% 1A 8MMInr... |
SL08 20002 | Ametherm | 0.4 $ | 5248 | ICL 20 OHM 20% 2A 8MMInru... |
SL08 50001 | Ametherm | 0.4 $ | 2219 | ICL 50 OHM 20% 1.1A 8MMIn... |
SL08 5R002 | Ametherm | 0.55 $ | 4115 | ICL 5 OHM 20% 2A 8MMInrus... |
SL08 2R503 | Ametherm | 0.55 $ | 3262 | ICL 2.5 OHM 25% 3A 8MMInr... |
SL08 33001 | Ametherm | 0.4 $ | 1513 | ICL 33 OHM 20% 1.3A 8MMIn... |
SL08 50001-A | Ametherm | 0.4 $ | 962 | ICL 50 OHM 15% 1.1A 8MMIn... |
SL08 4R003 | Ametherm | 0.4 $ | 173 | INRUSH CURRENT LIMITERS 8... |
SL08 10002-A | Ametherm | 0.4 $ | 395 | ICL 10 OHM 20% 2A 8MMInru... |
SL08 5R003 | Ametherm | 0.4 $ | 1000 | ICL 5 OHM 20% 3A 8MMInrus... |
SL08 22101 | Ametherm | 0.2 $ | 1000 | ICL 220 OHM 25% 1A 8MMInr... |
SL08 7R002 | Ametherm | 0.2 $ | 1000 | ICL 7 OHM 20% 2A 8MMInrus... |
SL08 10001-A | Ametherm | 0.2 $ | 1000 | ICL 10 OHM 20% 1A 8MMInru... |
SL08 12101-A | Ametherm | 0.2 $ | 1000 | ICL 120 OHM 20% 1A 8MMInr... |
SL08 20002-A | Ametherm | 0.2 $ | 1000 | ICL 20 OHM 25% 2A 9MMInru... |
SL08 22101-A | Ametherm | 0.2 $ | 1000 | ICL 220 OHM 25% 1A 8MMInr... |
SL08 2R503-A | Ametherm | 0.2 $ | 1000 | ICL 2.5 OHM 25% 3A 8MMInr... |
SL08 5R002-A | Ametherm | 0.2 $ | 1000 | ICL 5 OHM 20% 2A 8MMInrus... |
SL08 7R002-A | Ametherm | 0.2 $ | 1000 | ICL 7 OHM 20% 2A 8MMInrus... |
SL08 10001 | Ametherm | 0.28 $ | 1000 | ICL 10 OHM 20% 1A 8MMInru... |
SL08 10002 | Ametherm | 0.4 $ | 553 | ICL 10 OHM 20% 2.5A 8MMIn... |
SL08 33001-A | Ametherm | 0.4 $ | 470 | ICL 33 OHM 15% 1.3A 8MMIn... |
PMC40 SL080 | Alpha Wire | 5.83 $ | 2 | MERIC STNDRD PLSTC 19-28M... |
PPC7 SL080 | Alpha Wire | 1.03 $ | 2171 | 3-6.5MM STNDRD PLSTC PGCa... |
PPC9 SL080 | Alpha Wire | 1.18 $ | 1130 | 4-8MM STNDRD PLSTC PGCabl... |
PMC12 SL080 | Alpha Wire | 1.29 $ | 1830 | METRIC 3-6.5MM STNDRD PLS... |
PNC1/2 SL080 | Alpha Wire | 1.65 $ | 1794 | 6-12MM STNDRD PLSTCCable ... |
PNS3/8 SL080 | Alpha Wire | 1.81 $ | 212 | 5-10MM SPIRAL PLSTC NPTCa... |
PNC1/2W SL080 | Alpha Wire | 1.84 $ | 313 | 10-14MM STNDRD PLSTCCable... |
PMS16 SL080 | Alpha Wire | 1.86 $ | 269 | METRIC 5-10MM SPIRAL PLST... |
PPS13 SL080 | Alpha Wire | 1.89 $ | 291 | 6-12MM SPIRAL PLSTC PGCab... |
PMC25 SL080 | Alpha Wire | 2.28 $ | 168 | METRIC STNDRD PLSTC 11-17... |
PPC21 SL080 | Alpha Wire | 2.28 $ | 99 | 13-18MM STNDRD PLSTC PGCa... |
PNS1/2 SL080 | Alpha Wire | 2.3 $ | 411 | 6-12MM SPIRAL PLSTC NPTCa... |
PPS16 SL080 | Alpha Wire | 2.3 $ | 266 | 10-14MM SPIRAL PLSTC PGCa... |
PMS20 SL080 | Alpha Wire | 2.37 $ | 211 | METRIC 10-14MM SPIRAL PLS... |
PNC3/4 SL080 | Alpha Wire | 2.62 $ | 128 | 13-18MM STNDRD PLSTCCable... |
PNS3/4 SL080 | Alpha Wire | 3.49 $ | 130 | 13-18MM SPIRAL PLSTC NPTC... |
PMS25 SL080 | Alpha Wire | 3.79 $ | 140 | METRIC 13-18MM SPIRAL PLS... |
PPC29 SL080 | Alpha Wire | 4.1 $ | 98 | 18-25MM STNDRD PLSTC PGCa... |
ICL 1.3 OHM 25% 8A 13.97MMInrush Current...
ICL 10 OHM 20% 5A 12MMInrush Current Lim...
ICL 4 OHM 20% 23A 30MMInrush Current Lim...
ICL 16 OHM 20% 4A 22MMInrush Current Lim...
ICL 16 OHM 25% 4A 19.56MMInrush Current ...
ICL 33 OHM 20% 2.5A 15MMInrush Current L...