SL08 50001

Series:	miniAMP
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
R @ 25°C:	50 Ohms
Tolerance:	±20%
Current - Steady State Max:	1.1A
R @ Current:	950 mOhms
Diameter:	0.315" (8mm)
Lead Spacing:	0.250" (6.35mm)
Approvals:	UL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiters (ICL)

Inrush current limiters (ICL), such as the SL08 50001, are specialized devices that are commonly used in electrical systems to prevent a surge in current, or inrush, when switching on electrical equipment. When high-powered electrical equipment is switched on, it can draw much more current than what is designated in the steady-state specifications of the equipment. This inrush current can be so high that it can trip the circuit breaker or cause a power outage. As such, the SL08 50001 is a device that is designed to limit the inrush current of an electrical circuit.The SL08 50001 limits inrush current in a variety of ways. The circuit board design employs PTC thermistors to limit the initial current flow. A PTC thermistor is a special resistor whose resistance increases with temperature. This feature of the device carries out two important functions: it limits the inrush current and stabilizes the steady-state temperature of the circuit. Another feature of the SL08 50001 is its use of a power supply, which can feature voltage or current-regulated power sources. This power supply is used to regulate the current supplied to the system. Once the current supply reaches the designated voltage or current level, the SL08 50001 can limit the inrush current. It also includes an automatic reset switch, which is used to reset the device after the current has been displaced or shut down. The SL08 50001 also includes a bypass relay. This relay is designed to provide an alternate route for the current, allowing it to bypass the ICL device. This is useful in instances where the current is too high for the device to handle, or when the device fails to operate properly. In general, the SL08 50001 works by limiting the initial inrush current of the system and then controlling the current levels after the current has been stabilized. By regulating the current, the device can prevent the system from tripping or power outages. This makes it a useful device for protecting the system from current surges and overloading that can occur during power-on or sudden voltage changes. In order for the SL08 50001 to work properly, it must be properly installed. It is recommended that the device is installed in a location that allows easy access and is away from sources of direct sunlight, high humidity, and other sources of electromagnetic interference. Furthermore, the device should be connected to the power system with insulated wires and appropriate cable connectors. Overall, the SL08 50001 is an effective device for preventing power outages and current surges in electrical systems. Its circuit board design and features, such as the PTC thermistors, the power supply, and the bypass relay, allow it to limit the inrush current and protect the system from overloading or damage. As such, the SL08 50001 is a popular and reliable ICL device for use in a variety of settings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description