SM102031252JE

Series:	Slim-Mox
Packaging:	Bulk
Part Status:	Active
Resistance:	12.5 kOhms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Thick Film
Features:	Non-Inductive
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 110°C
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	0.580" L x 0.100" W (14.73mm x 2.54mm)
Height - Seated (Max):	0.340" (8.64mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are common components used in electronic circuits for a variety of applications. A through hole resistor is designed to provide reliable electrical resistance to electrical signals or currents that flow through it. By doing so, they can limit current, dissipate power, divide voltages, or provide frequency dependent requirement. As such, through hole resistors are vital components in any electronic circuit. The SM102031252JE is a through hole resistor that is specially designed for high voltage applications. It is unique in the electronics field because of its incredibly small size, making it ideal for those tight space applications as well as its ability to withstand extremely high voltages and currents. To understand the SM102031252JE\'s application field and working principle, one must first understand the principle of electrical resistance. Electric resistance is a measure of the opposition that a material presents to the flow of electric current. The current flows from a higher voltage to a lower one through an electrically conducting material, and the resistance is the measure of how much the current is opposed by the material. Generally speaking, all materials have some level of electrical resistance; however, some materials have higher resistance than others. When it comes to the SM102031252JE, its resistance is determined by a combination of its construction and materials. The SM102031252JE consists of a metal outer shell filled with an insulating material and two leads, or “pins” attached to the back of the resistor. The leads are connected to a metal element, which is designed to dissipate heat and regulate the current that flows through the resistor. The metal element also acts as an electrical connection point between the resistor and the circuit. The SM102031252JE\'s working principle is based on Ohm\'s law, which states that the current flowing through a material is inversely proportional to its resistance. In other words, the higher the resistance of a material, the less current will pass through it. This is useful for applications such as limiting current flow, dividing voltages, or providing frequency-dependent requirements. In the case of the SM102031252JE, its resistance is designed to resist high voltages and currents while still allowing enough current to flow through the circuit to power the device. The SM102031252JE is best suited for high voltage applications such as those in power systems, motor drives, and industrial applications. It is a widely used component for both prototyping and production. The SM102031252JE is also widely used in medical devices, solar panels, and other high voltage products. To summarize, the SM102031252JE is a through hole resistor that is uniquely designed for high voltage applications. It uses the principle of electrical resistance to resist high voltages and currents while still allowing enough current to flow through the circuit to power the device. Its application field is mainly found in power systems, motor drives, medical devices, solar panels, and other high voltage products.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description